{"title":"利用三维直接墨水写入和紫外线预固化技术研究 FeSiB/EP 软磁复合材料的性能","authors":"Qing Ma, Xiaotong Fang, Yerong Shi, Jing Hu","doi":"10.1177/09673911241245006","DOIUrl":null,"url":null,"abstract":"UV-cured 3D printing technology had become more and more popular due to its rapid printing speed and high molding accuracy. However, for ordinary Direct-ink-writing (DIW) printers, though there were widely materials can be used, but they cannot be quickly printed and molding accuracy was much low. Therefore, a simple method combined UV-cured and DIW was summarized in this paper, before DIW the mixed slurry (FeSiB and Epoxy resins soft magnetic composites without photoinitiator added) was pre-curing by UV for some time to a semi-cured state, the rheological properties of the slurry were investigated and the magnetic, mechanical properties and micromorphology of printed products were studied. Compared with the printed products without UV pre-curing, the coercive force (H<jats:sub>c</jats:sub>) was reduced by 20.36%, the elastic modulus increased by 34.41%, and the insulating coating after UV pre-curing was more uniform, with no obvious defects.","PeriodicalId":20417,"journal":{"name":"Polymers and Polymer Composites","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2024-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Study on the FeSiB/EP soft magnetic composites performance with 3D direct-ink-writing and ultraviolet pre-curing\",\"authors\":\"Qing Ma, Xiaotong Fang, Yerong Shi, Jing Hu\",\"doi\":\"10.1177/09673911241245006\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"UV-cured 3D printing technology had become more and more popular due to its rapid printing speed and high molding accuracy. However, for ordinary Direct-ink-writing (DIW) printers, though there were widely materials can be used, but they cannot be quickly printed and molding accuracy was much low. Therefore, a simple method combined UV-cured and DIW was summarized in this paper, before DIW the mixed slurry (FeSiB and Epoxy resins soft magnetic composites without photoinitiator added) was pre-curing by UV for some time to a semi-cured state, the rheological properties of the slurry were investigated and the magnetic, mechanical properties and micromorphology of printed products were studied. Compared with the printed products without UV pre-curing, the coercive force (H<jats:sub>c</jats:sub>) was reduced by 20.36%, the elastic modulus increased by 34.41%, and the insulating coating after UV pre-curing was more uniform, with no obvious defects.\",\"PeriodicalId\":20417,\"journal\":{\"name\":\"Polymers and Polymer Composites\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-07-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Polymers and Polymer Composites\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1177/09673911241245006\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Polymers and Polymer Composites","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1177/09673911241245006","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Study on the FeSiB/EP soft magnetic composites performance with 3D direct-ink-writing and ultraviolet pre-curing
UV-cured 3D printing technology had become more and more popular due to its rapid printing speed and high molding accuracy. However, for ordinary Direct-ink-writing (DIW) printers, though there were widely materials can be used, but they cannot be quickly printed and molding accuracy was much low. Therefore, a simple method combined UV-cured and DIW was summarized in this paper, before DIW the mixed slurry (FeSiB and Epoxy resins soft magnetic composites without photoinitiator added) was pre-curing by UV for some time to a semi-cured state, the rheological properties of the slurry were investigated and the magnetic, mechanical properties and micromorphology of printed products were studied. Compared with the printed products without UV pre-curing, the coercive force (Hc) was reduced by 20.36%, the elastic modulus increased by 34.41%, and the insulating coating after UV pre-curing was more uniform, with no obvious defects.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
