A. I. Pronin, V. V. Myl’nikov, D. A. Val’ko, A. A. Voronoi, M. V. Myl’nikova, N. A. Ryabov
{"title":"车削铝基铸造复合材料工件毛坯时加工参数的动态研究","authors":"A. I. Pronin, V. V. Myl’nikov, D. A. Val’ko, A. A. Voronoi, M. V. Myl’nikova, N. A. Ryabov","doi":"10.1134/S1052618824700286","DOIUrl":null,"url":null,"abstract":"<p>A solution to the problem of determining the components of the cutting force and the cutting temperature when turning an aluminum matrix cast composite material is presented. The components of the cutting force and the cutting temperature when processing an aluminum matrix cast composite material with a hard alloy were taken as the optimization parameters. The studies were carried out using a specially designed experimental setup that consists of a lathe and a bench for recording, monitoring, and analyzing dynamic processes in the form of a signal from the cutter during turning. The computer and mathematical processing of the results obtained was carried out using the least squares method, which made it possible to derive the calculation equations to determine the factors under study. The optimal values of the factors corresponding to the optimal cutting force components and the corresponding cutting temperatures are determined.</p>","PeriodicalId":642,"journal":{"name":"Journal of Machinery Manufacture and Reliability","volume":"53 4","pages":"322 - 327"},"PeriodicalIF":0.4000,"publicationDate":"2024-07-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Study of the Dynamics of Processing Parameters When Turning an Aluminomatrix Cast Composite Workblank\",\"authors\":\"A. I. Pronin, V. V. Myl’nikov, D. A. Val’ko, A. A. Voronoi, M. V. Myl’nikova, N. A. Ryabov\",\"doi\":\"10.1134/S1052618824700286\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>A solution to the problem of determining the components of the cutting force and the cutting temperature when turning an aluminum matrix cast composite material is presented. The components of the cutting force and the cutting temperature when processing an aluminum matrix cast composite material with a hard alloy were taken as the optimization parameters. The studies were carried out using a specially designed experimental setup that consists of a lathe and a bench for recording, monitoring, and analyzing dynamic processes in the form of a signal from the cutter during turning. The computer and mathematical processing of the results obtained was carried out using the least squares method, which made it possible to derive the calculation equations to determine the factors under study. The optimal values of the factors corresponding to the optimal cutting force components and the corresponding cutting temperatures are determined.</p>\",\"PeriodicalId\":642,\"journal\":{\"name\":\"Journal of Machinery Manufacture and Reliability\",\"volume\":\"53 4\",\"pages\":\"322 - 327\"},\"PeriodicalIF\":0.4000,\"publicationDate\":\"2024-07-27\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Machinery Manufacture and Reliability\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://link.springer.com/article/10.1134/S1052618824700286\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Machinery Manufacture and Reliability","FirstCategoryId":"1085","ListUrlMain":"https://link.springer.com/article/10.1134/S1052618824700286","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Study of the Dynamics of Processing Parameters When Turning an Aluminomatrix Cast Composite Workblank
A solution to the problem of determining the components of the cutting force and the cutting temperature when turning an aluminum matrix cast composite material is presented. The components of the cutting force and the cutting temperature when processing an aluminum matrix cast composite material with a hard alloy were taken as the optimization parameters. The studies were carried out using a specially designed experimental setup that consists of a lathe and a bench for recording, monitoring, and analyzing dynamic processes in the form of a signal from the cutter during turning. The computer and mathematical processing of the results obtained was carried out using the least squares method, which made it possible to derive the calculation equations to determine the factors under study. The optimal values of the factors corresponding to the optimal cutting force components and the corresponding cutting temperatures are determined.
期刊介绍：
Journal of Machinery Manufacture and Reliability is devoted to advances in machine design; CAD/CAM; experimental mechanics of machines, machine life expectancy, and reliability studies; machine dynamics and kinematics; vibration, acoustics, and stress/strain; wear resistance engineering; real-time machine operation diagnostics; robotic systems; new materials and manufacturing processes, and other topics.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
