Enhanced performance of amine and thiol chemically modified graphene oxide for effective removal of Hg(II), Pb(II), and Cr(VI) from aqueous solution

This study describes a novel adsorbent with a multidentate ligand that was facilely fabricated by covalently bonding 4-amino-3-hydrazino-5-mercapto-1,2,4-triazole on graphene oxide (AHMT-PRGO). The AHMT-PRGO nano-adsorbent was used for the effective removal of Hg(II), Pb(II), and Cr(VI) from wastewater. The AHMT-PRGO nano-adsorbent was synthesized by a nucleophilic substitution reaction between GO acyl chloride and AHMT chelating ligand in the presence of tetrabutyl-ammonium bromide as a catalyst. The successful modifications were confirmed via several spectroscopic and electron microscopy instrumentations including UV–Vis, FTIR, Raman, XRD, XPS, SEM, and TEM. The maximum adsorption capacities of Hg(II), Cr(VI), and Pb(II) on the AHMT-PRGO nano-adsorbent were 370.0, 136.2, and 109.6 mg/g, respectively, exceeding those of most previously reported adsorbents. Additionally, the equilibrium contact times for Hg(II), Pb(II), and Cr(VI) were 60, 30, and 400 min, respectively. In a mixture of nine heavy metal ions containing 250 ppm of each ion, the AHMT-PRGO nano-adsorbent exhibited high selectivity for Hg(II) ions. Furthermore, the AHMT-PRGO nano-adsorbent showed high stability over five adsorption–desorption cycles. Additionally, the AHMT-PRGO nano-adsorbent was successfully applied to remove heavy metal ions from real water samples. The novelty of AHMT-PRGO lies in the combination of a multidentate ligand for strong and selective binding with the high surface area and stability offered by covalently bonded graphene oxide. This combination offers potential advantages over traditional adsorbents in terms of adsorption capacity, selectivity, and reusability.