A wave model of high frequency vibrational energy transfer in a wedge-shaped combined plate structure

Wedge shaped combined plate structure (WCPS) is broadly applied in large-sized transport equipment such as aerospace and shipping. However, with the increase of equipment operating running, it is easy to cause high-frequency vibration of structure components. Therefore, studying the energy transfer and vibration response of high-frequency vibration in WCPS is significant for the structural design of aerospace and shipping. The promising method is energy finite element analysis (EFEA). However, the energy transfer coefficient at joint of WCPS is needed in EFEA. The current studies about the energy transfer coefficients are focus on the joint between two uniform thickness plate. But it is some different that getting the energy transfer coefficient for WCPS, because the near-field solve representation for wedge-shaped plate is complicated due to the non-uniform thickness of wedge-shaped plate member in WCPS. In this research, geometric acoustic approximation and an equilibrium equation on both ends of joints were used to derive the equation of the energy transfer coefficient for the WCPS. Then by setting coupling nodes, construction of a coupling matrix to characterize discontinuity of energy density at the coupling position of the WCPS and energy density governing equation of wedge-shaped plates were integrated. In doing so, the EFEA modeling of the WCPS was developed and the energy density distribution on each node of the WCPS could be obtained. Same-sized uniformly coupled structures is analyzed, the vibration energy distribution characteristics of two types of coupling structures were compared. The results show that the energy density value of the wedge plate member attenuate more slowly than that of the uniform plate member due to the acoustic black hole aggregation effect in the wedge plate part, and there is an abrupt change in the energy density value at the joint of WCPS. As a result, the factors influencing high-frequency vibration energy transfer were investigated.