Impacts of using porous corner partitions and blade shaped nanoparticles in base fluid on the performance improvement of TEG mounted vented cavities and interface temperature estimation with POD

A unique technique for improving the performance of a thermoelectric generator (TEG) positioned between vented cavities is proposed. The method combines the effects of blade-shaped nanoparticles in the base fluid and corner porous partitions. The numerical study by using finite element method is conducted for different values of Darcy number of upper and lower cavity (10−6 ≤ Da1 ≤ 10−2 , 10−6 ≤ Da2 ≤ 10−2 ), opening ratio (SR between 0.5 and 2.5) and nanoparticle loading amount (SVF between 0 and 0.03). By adjusting the permeability of the partitions and opening ratio of the cavities, significant changes in the flow field can be obtained. TEG power increases with greater opening ratios and lower partition permeabilities. By changing the permeability, the TEG power can increase by up to 27.5 percent while increasing the opening ratio from SR=0.5 to SR=1 can increase the TEG power by up to 140 percent. Using blade-shaped nanoparticles results in additional improvements, with values of 32.7% at SR=0.5 and 20.26% at SR=2.5. Using 180 parametric computational fluid dynamics cases, a PODbased low-cost reconstruction model is created for the interface temperatures at the hot and cold sides using 5-POD modes. The approach enables quick computation of couped TEG- vented cavity systems with corner partitions and is applicable to other complex geometries where 3D computations are expensive.