{"title":"各种耕作制度和耕作速度对某些土壤物理特性的影响","authors":"Momtaz Isaak, Abdulla Azawi, Thaer Turky","doi":"10.1556/446.2024.00070","DOIUrl":null,"url":null,"abstract":"Soil cultivation techniques can change the physical properties of soil and have the potential to influence the growth and productivity of crops. In the 2022 season, a research study was carried out on Gypsfreous soil in the College of Agriculture fields at Tikrit University. The purpose of the study was to investigate how the physical properties of the soil are influenced by three different plow types and varying plowing speeds. The study was planned using split plots within a Complete Randomized Blocks Design, with three types of plows (moldboard plow, disc plow, and chisel plow) and three tractor speeds (3.8, 5.8, and 7.6 km h−1) as the experimental treatments.The experiment's findings indicated that the moldboard plow resulted in a greater reduction in bulk density compared to the disc plow. Consequently, the soil's bulk density decreased, and the percentage of porosity increased. On the other hand, the chisel plow had the lowest soil-specific resistance value and the highest soil volume disturbed value. The speed of operation above 3.8 km h−1 proved to be the most effective in reducing bulk soil density, increasing soil porosity, and reducing specific soil resistance. However, at a speed of 7.6 km h−1, the soil volume disturbed was significantly higher than at other speeds. Additionally, the experiment's findings demonstrated that the moldboard plow, operating at a speed of 3.8 km h−1, was significantly more effective than other methods in decreasing the soil's bulk density, increasing the porosity percentage, and reducing the specific soil resistance. Conversely, the chisel plow, working at a speed of 7.6 km h−1, had a significant advantage in achieving the highest value for the volume of soil disturbed.","PeriodicalId":20837,"journal":{"name":"Progress in Agricultural Engineering Sciences","volume":"18 22","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Influence of various tillage systems and tillage speed on some soil physical properties\",\"authors\":\"Momtaz Isaak, Abdulla Azawi, Thaer Turky\",\"doi\":\"10.1556/446.2024.00070\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Soil cultivation techniques can change the physical properties of soil and have the potential to influence the growth and productivity of crops. In the 2022 season, a research study was carried out on Gypsfreous soil in the College of Agriculture fields at Tikrit University. The purpose of the study was to investigate how the physical properties of the soil are influenced by three different plow types and varying plowing speeds. The study was planned using split plots within a Complete Randomized Blocks Design, with three types of plows (moldboard plow, disc plow, and chisel plow) and three tractor speeds (3.8, 5.8, and 7.6 km h−1) as the experimental treatments.The experiment's findings indicated that the moldboard plow resulted in a greater reduction in bulk density compared to the disc plow. Consequently, the soil's bulk density decreased, and the percentage of porosity increased. On the other hand, the chisel plow had the lowest soil-specific resistance value and the highest soil volume disturbed value. The speed of operation above 3.8 km h−1 proved to be the most effective in reducing bulk soil density, increasing soil porosity, and reducing specific soil resistance. However, at a speed of 7.6 km h−1, the soil volume disturbed was significantly higher than at other speeds. Additionally, the experiment's findings demonstrated that the moldboard plow, operating at a speed of 3.8 km h−1, was significantly more effective than other methods in decreasing the soil's bulk density, increasing the porosity percentage, and reducing the specific soil resistance. Conversely, the chisel plow, working at a speed of 7.6 km h−1, had a significant advantage in achieving the highest value for the volume of soil disturbed.\",\"PeriodicalId\":20837,\"journal\":{\"name\":\"Progress in Agricultural Engineering Sciences\",\"volume\":\"18 22\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-01-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Progress in Agricultural Engineering Sciences\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1556/446.2024.00070\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Agricultural and Biological Sciences\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Progress in Agricultural Engineering Sciences","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1556/446.2024.00070","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Agricultural and Biological Sciences","Score":null,"Total":0}
Influence of various tillage systems and tillage speed on some soil physical properties
Soil cultivation techniques can change the physical properties of soil and have the potential to influence the growth and productivity of crops. In the 2022 season, a research study was carried out on Gypsfreous soil in the College of Agriculture fields at Tikrit University. The purpose of the study was to investigate how the physical properties of the soil are influenced by three different plow types and varying plowing speeds. The study was planned using split plots within a Complete Randomized Blocks Design, with three types of plows (moldboard plow, disc plow, and chisel plow) and three tractor speeds (3.8, 5.8, and 7.6 km h−1) as the experimental treatments.The experiment's findings indicated that the moldboard plow resulted in a greater reduction in bulk density compared to the disc plow. Consequently, the soil's bulk density decreased, and the percentage of porosity increased. On the other hand, the chisel plow had the lowest soil-specific resistance value and the highest soil volume disturbed value. The speed of operation above 3.8 km h−1 proved to be the most effective in reducing bulk soil density, increasing soil porosity, and reducing specific soil resistance. However, at a speed of 7.6 km h−1, the soil volume disturbed was significantly higher than at other speeds. Additionally, the experiment's findings demonstrated that the moldboard plow, operating at a speed of 3.8 km h−1, was significantly more effective than other methods in decreasing the soil's bulk density, increasing the porosity percentage, and reducing the specific soil resistance. Conversely, the chisel plow, working at a speed of 7.6 km h−1, had a significant advantage in achieving the highest value for the volume of soil disturbed.
期刊介绍:
The Journal publishes original papers, review papers and preliminary communications in the field of agricultural, environmental and process engineering. The main purpose is to show new scientific results, new developments and procedures with special respect to the engineering of crop production and animal husbandry, soil and water management, precision agriculture, information technology in agriculture, advancements in instrumentation and automation, technical and safety aspects of environmental and food engineering.