Mohamed K. Kamaludeen, Kirn Zafar, Yusef Esa, Ahmed Ali A. Mohamed, Elihu Nyemah, Lizzette Salmeron, Simon Odie
{"title":"直流快速充电器、电网规模储能和太阳能光伏发电的通用直流 (DC) 总线集成:纽约市案例研究","authors":"Mohamed K. Kamaludeen, Kirn Zafar, Yusef Esa, Ahmed Ali A. Mohamed, Elihu Nyemah, Lizzette Salmeron, Simon Odie","doi":"10.1049/stg2.12154","DOIUrl":null,"url":null,"abstract":"<p>The mass deployment of distributed energy resources (DERs) to achieve clean energy objectives has become a major goal across several states in the U.S. However, the viability and reality of achieving these goals in dense urban areas, such as New York City, are challenged by several ‘Techno-Economic’ barriers associated with available land space and the number of AC/direct current (DC) conversion stages that requires multiple electrical balance of plant (BOP) equipment for pairing/interconnecting these resources to the grid. The fundamental issue of interconnection is addressed by assessing the use of a common DC bus in a one-of-a-kind configuration (to pair grid-connected energy storage, photovoltaic, and electric vehicle chargers (EVC) systems) and reduce the number of BOP equipment needed for deployment. Building on similar work that has touched on distribution-level DC interconnection, this paper will also address the intricacies of interconnecting third-party and Utility DERs to a DC-based point of common coupling. It will examine the requisite site controller configuration (control architecture) and requirements to coordinate the energy storage system's use between managing Utility and Third-Party EVC demand while prioritising dispatch. The result shows that the DC-coupled system is technologically feasible and hierarchical control architecture is recommended to maintain stability during various use cases proposed. This will inform a lab demonstration of this system that aims to test DC integration of the DERs with recommendations for the microgrid (MG) controllers and reduction in the BOP equipment. These learnings will then be applied to practical grid-scale deployment of the systems at Con Edison's Cedar Street Substation. This system, if proven successful, has the potential to change the way community distributed generation and MGs are interconnected to the Utility System.</p>","PeriodicalId":36490,"journal":{"name":"IET Smart Grid","volume":"7 3","pages":"351-365"},"PeriodicalIF":2.4000,"publicationDate":"2024-01-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://onlinelibrary.wiley.com/doi/epdf/10.1049/stg2.12154","citationCount":"0","resultStr":"{\"title\":\"Common direct current (DC) bus integration of DC fast chargers, grid-scale energy storage, and solar photovoltaic: New York City case study\",\"authors\":\"Mohamed K. Kamaludeen, Kirn Zafar, Yusef Esa, Ahmed Ali A. Mohamed, Elihu Nyemah, Lizzette Salmeron, Simon Odie\",\"doi\":\"10.1049/stg2.12154\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>The mass deployment of distributed energy resources (DERs) to achieve clean energy objectives has become a major goal across several states in the U.S. However, the viability and reality of achieving these goals in dense urban areas, such as New York City, are challenged by several ‘Techno-Economic’ barriers associated with available land space and the number of AC/direct current (DC) conversion stages that requires multiple electrical balance of plant (BOP) equipment for pairing/interconnecting these resources to the grid. The fundamental issue of interconnection is addressed by assessing the use of a common DC bus in a one-of-a-kind configuration (to pair grid-connected energy storage, photovoltaic, and electric vehicle chargers (EVC) systems) and reduce the number of BOP equipment needed for deployment. Building on similar work that has touched on distribution-level DC interconnection, this paper will also address the intricacies of interconnecting third-party and Utility DERs to a DC-based point of common coupling. It will examine the requisite site controller configuration (control architecture) and requirements to coordinate the energy storage system's use between managing Utility and Third-Party EVC demand while prioritising dispatch. The result shows that the DC-coupled system is technologically feasible and hierarchical control architecture is recommended to maintain stability during various use cases proposed. This will inform a lab demonstration of this system that aims to test DC integration of the DERs with recommendations for the microgrid (MG) controllers and reduction in the BOP equipment. These learnings will then be applied to practical grid-scale deployment of the systems at Con Edison's Cedar Street Substation. This system, if proven successful, has the potential to change the way community distributed generation and MGs are interconnected to the Utility System.</p>\",\"PeriodicalId\":36490,\"journal\":{\"name\":\"IET Smart Grid\",\"volume\":\"7 3\",\"pages\":\"351-365\"},\"PeriodicalIF\":2.4000,\"publicationDate\":\"2024-01-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://onlinelibrary.wiley.com/doi/epdf/10.1049/stg2.12154\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"IET Smart Grid\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://onlinelibrary.wiley.com/doi/10.1049/stg2.12154\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, ELECTRICAL & ELECTRONIC\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"IET Smart Grid","FirstCategoryId":"1085","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1049/stg2.12154","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0
摘要
大规模部署分布式能源资源(DERs)以实现清洁能源目标已成为美国多个州的主要目标。然而,在纽约市等人口密集的城市地区实现这些目标的可行性和现实性却面临着若干 "技术经济 "障碍的挑战,这些障碍与可用土地空间和交流/直流(DC)转换级数有关,需要多个电厂平衡(BOP)设备将这些资源配对/互连到电网。互联的基本问题是通过评估在独特配置中使用通用直流总线(将并网储能、光伏和电动汽车充电器(EVC)系统配对),减少部署所需的 BOP 设备数量来解决的。在涉及配电级直流互联的类似工作的基础上,本文还将探讨将第三方和公用事业 DERs 互联到基于直流的共同耦合点的复杂性。本文将研究必要的现场控制器配置(控制架构)和要求,以协调储能系统在管理公用事业和第三方 EVC 需求之间的使用,同时优先调度。研究结果表明,直流耦合系统在技术上是可行的,并建议采用分层控制架构,以在提出的各种使用情况下保持稳定。这将为该系统的实验室演示提供信息,该演示旨在测试 DERs 的直流集成,并对微电网 (MG) 控制器和减少 BOP 设备提出建议。然后,这些经验将被应用到 Con Edison 的 Cedar Street 变电站的实际电网规模部署中。如果该系统被证明是成功的,则有可能改变社区分布式发电和 MG 与公用事业系统互联的方式。
Common direct current (DC) bus integration of DC fast chargers, grid-scale energy storage, and solar photovoltaic: New York City case study
The mass deployment of distributed energy resources (DERs) to achieve clean energy objectives has become a major goal across several states in the U.S. However, the viability and reality of achieving these goals in dense urban areas, such as New York City, are challenged by several ‘Techno-Economic’ barriers associated with available land space and the number of AC/direct current (DC) conversion stages that requires multiple electrical balance of plant (BOP) equipment for pairing/interconnecting these resources to the grid. The fundamental issue of interconnection is addressed by assessing the use of a common DC bus in a one-of-a-kind configuration (to pair grid-connected energy storage, photovoltaic, and electric vehicle chargers (EVC) systems) and reduce the number of BOP equipment needed for deployment. Building on similar work that has touched on distribution-level DC interconnection, this paper will also address the intricacies of interconnecting third-party and Utility DERs to a DC-based point of common coupling. It will examine the requisite site controller configuration (control architecture) and requirements to coordinate the energy storage system's use between managing Utility and Third-Party EVC demand while prioritising dispatch. The result shows that the DC-coupled system is technologically feasible and hierarchical control architecture is recommended to maintain stability during various use cases proposed. This will inform a lab demonstration of this system that aims to test DC integration of the DERs with recommendations for the microgrid (MG) controllers and reduction in the BOP equipment. These learnings will then be applied to practical grid-scale deployment of the systems at Con Edison's Cedar Street Substation. This system, if proven successful, has the potential to change the way community distributed generation and MGs are interconnected to the Utility System.