Effect of Different Metal Bonding Agents on Shear Bond Strength of Ceramic to Direct Metal Laser Sintering

Introduction: laser sinter Cobalt Chromium metal replacing traditional casting processes of dental alloys for metal ceramic restorations, appropriate bonding of ceramic to metal is an important factor for long survival time. Twenty laser sinter cubic metal 10 mm for each sides was fabricated by software designing and CAD\CAM direct metal laser sintering technique. The twenty cubics were classified according to the type of metal to ceramic bonding agents into two groups (n=10), Ceram bond apply for group A and Crea alloy bond for group B. Samples fabricated using custom made silicon index was used to act as standardized mold for metal bond application and porcelain buildup. Instron with chisel indenter and special holding device were involve to measure the strength of bond for ceramic to laser sinter metal. The mean shear bond load of group A (688.8N) was significantly higher than that of group B (303.2N). Application of Ceram bond to metal laser sinter produces more bond strength when compare to usage of Crea bond material.