循环过载对蠕变疲劳条件下 12Cr 钢 C（T）试样的变形、裂纹生长行为和裂纹起始/生长寿命的影响

IF 1 4区材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY

Materials at High Temperatures Pub Date : 2024-01-16 DOI:10.1080/09603409.2024.2305495

Go Ozeki, Toshimitsu Yokobori Jr., Daisuke Kobayashi

引用次数: 0

摘要

在这项研究中，使用用于蒸汽轮机转子的 12Cr 钢的 C(T) 试样，在有过载和无过载的蠕变疲劳条件下进行了裂纹生长试验，并对其进行了基本分析。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Effect of cyclic overload on deformation, crack growth behavior and crack initiation/growth lives of a C(T) specimen for 12Cr steel under creep-fatigue condition

In this study, using a C(T) specimen for 12Cr steel used for a steam turbine rotor, crack growth tests under creep-fatigue conditions with and without overloading were conducted and the fundamental...

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Materials at High Temperatures 工程技术-材料科学：综合

CiteScore

1.90

自引率

15.40%

发文量

审稿时长

>12 weeks

期刊介绍： Materials at High Temperatures welcomes contributions relating to high temperature applications in the energy generation, aerospace, chemical and process industries. The effects of high temperatures and extreme environments on the corrosion and oxidation, fatigue, creep, strength and wear of metallic alloys, ceramics, intermetallics, and refractory and composite materials relative to these industries are covered. Papers on the modelling of behaviour and life prediction are also welcome, provided these are validated by experimental data and explicitly linked to actual or potential applications. Contributions addressing the needs of designers and engineers (e.g. standards and codes of practice) relative to the areas of interest of this journal also fall within the scope. The term ''high temperatures'' refers to the subsequent temperatures of application and not, for example, to those of processing itself. Materials at High Temperatures publishes regular thematic issues on topics of current interest. Proposals for issues are welcomed; please contact one of the Editors with details.