确定来流对吸水套管入口处涡流区的影响。第 1 部分。平面问题

IF 0.4 4区材料科学 Q4 MATERIALS SCIENCE, CERAMICS

Refractories and Industrial Ceramics Pub Date : 2023-12-21 DOI:10.1007/s11148-023-00829-7

A. K. Logacheva, O. A. Averkova, A. M. Ziganshin, K. I. Logachev, E. N. Popov

{"title":"确定来流对吸水套管入口处涡流区的影响。第 1 部分。平面问题","authors":"A. K. Logacheva, O. A. Averkova, A. M. Ziganshin, K. I. Logachev, E. N. Popov","doi":"10.1007/s11148-023-00829-7","DOIUrl":null,"url":null,"abstract":"<p>The present study discusses the construction of an algorithm for calculating slot suction sockets under conditions of an oncoming flow using discrete vortices. It also presents the effects of flow patterns at different ratios of the oncoming and suction airflow velocities. The dependence of the sizes of the vortex zones arising at the inlet to the suction sockets on the velocity of the oncoming flow, length, and angle of inclination of the socket is determined. Equations are obtained for the critical velocity of the oncoming flow, at which the flow separation mode for the vortex zone 1 changes from separation inside the socket to outside it. The results obtained can be used to design local suction systems profiled according to the outlines of vortex zones.</p>","PeriodicalId":751,"journal":{"name":"Refractories and Industrial Ceramics","volume":null,"pages":null},"PeriodicalIF":0.4000,"publicationDate":"2023-12-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Determination of the Influence of the Oncoming Flow on the Vortex Zones at the Inlet to the Suction Sockets. Part 1. Flat Problem\",\"authors\":\"A. K. Logacheva, O. A. Averkova, A. M. Ziganshin, K. I. Logachev, E. N. Popov\",\"doi\":\"10.1007/s11148-023-00829-7\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>The present study discusses the construction of an algorithm for calculating slot suction sockets under conditions of an oncoming flow using discrete vortices. It also presents the effects of flow patterns at different ratios of the oncoming and suction airflow velocities. The dependence of the sizes of the vortex zones arising at the inlet to the suction sockets on the velocity of the oncoming flow, length, and angle of inclination of the socket is determined. Equations are obtained for the critical velocity of the oncoming flow, at which the flow separation mode for the vortex zone 1 changes from separation inside the socket to outside it. The results obtained can be used to design local suction systems profiled according to the outlines of vortex zones.</p>\",\"PeriodicalId\":751,\"journal\":{\"name\":\"Refractories and Industrial Ceramics\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.4000,\"publicationDate\":\"2023-12-21\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Refractories and Industrial Ceramics\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11148-023-00829-7\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, CERAMICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Refractories and Industrial Ceramics","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s11148-023-00829-7","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}

引用次数: 0

摘要

本研究讨论了在迎面气流条件下利用离散涡流计算槽吸口的算法结构。本研究还介绍了来流和吸入气流速度不同比率下的流动模式的影响。研究还确定了在吸入口产生的涡流区的大小与来流速度、长度和吸入口倾角的关系。得出了来流的临界速度方程，在该临界速度下，涡流区 1 的流动分离模式从插座内分离变为插座外分离。所得结果可用于根据涡流区的轮廓设计局部抽吸系统。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

Determination of the Influence of the Oncoming Flow on the Vortex Zones at the Inlet to the Suction Sockets. Part 1. Flat Problem

查看原文本刊更多论文

Determination of the Influence of the Oncoming Flow on the Vortex Zones at the Inlet to the Suction Sockets. Part 1. Flat Problem

The present study discusses the construction of an algorithm for calculating slot suction sockets under conditions of an oncoming flow using discrete vortices. It also presents the effects of flow patterns at different ratios of the oncoming and suction airflow velocities. The dependence of the sizes of the vortex zones arising at the inlet to the suction sockets on the velocity of the oncoming flow, length, and angle of inclination of the socket is determined. Equations are obtained for the critical velocity of the oncoming flow, at which the flow separation mode for the vortex zone 1 changes from separation inside the socket to outside it. The results obtained can be used to design local suction systems profiled according to the outlines of vortex zones.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

$Refractories and Industrial Ceramics$

Refractories and Industrial Ceramics 工程技术-材料科学：硅酸盐

CiteScore

0.90

自引率

20.00%

发文量

审稿时长

6-12 weeks

期刊介绍： Refractories and Industrial Ceramics publishes peer-reviewed articles on the latest developments and discoveries in the field of refractory materials and ceramics, focusing on the practical aspects of their production and use. Topics covered include: Scientific Research; Raw Materials; Production; Equipment; Heat Engineering; Applications.