310S不锈钢高温力学性能评价

IF 1 4区材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY

Materials at High Temperatures Pub Date : 2023-11-10 DOI:10.1080/09603409.2023.2281111

Jingwei Zhang, Zhicheng Li, Li Lin, Kanglin Liu

{"title":"310S不锈钢高温力学性能评价","authors":"Jingwei Zhang, Zhicheng Li, Li Lin, Kanglin Liu","doi":"10.1080/09603409.2023.2281111","DOIUrl":null,"url":null,"abstract":"ABSTRACTThe high-temperature mechanical properties of 310S stainless steel were investigated by uniaxial tensile tests and small punch tests at the temperature from 20℃ to 600℃, and the relationship between the mechanical properties (σYS ,σUTS) and the characteristic loads (Fy, Fm) was established. The results revealed that with increasing temperature, the mechanical properties of 310S decrease, and the characteristic loads obtained by Fy_Mao, Fy_EN and Fy_E3205 are more appropriate for determining the yield strength of materials at high temperatures particularly for Fy_E3205. The fracture pattern observed in the SPT specimens indicated a mixed tough-brittle fracture accompanied by the characteristics of cleavage fracture. Additionally, the ultimate tensile strength of the material and the maximum load Fm increased slightly at 400 ℃ compared to 300 ℃ due to the precipitation of a large number of granular carbides and the increase in the grain size.KEYWORDS: 310s steelSmall punch testHigh temperatureMechanical propertiesFracture Disclosure statementNo potential conflict of interest was reported by the author(s).Additional informationFundingThe work was supported by the National Natural Science Foundation of China (No.51705079), Natural Science Foundation of Fujian Province (No.2018J01767), Open Fund of Fujian Key Laboratory of Energy Measurement（Fujian Metrology Institute） (NYJL-KFKT-2022-02).","PeriodicalId":49877,"journal":{"name":"Materials at High Temperatures","volume":null,"pages":null},"PeriodicalIF":1.0000,"publicationDate":"2023-11-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"High-temperature mechanical properties evaluation of 310S stainless steel\",\"authors\":\"Jingwei Zhang, Zhicheng Li, Li Lin, Kanglin Liu\",\"doi\":\"10.1080/09603409.2023.2281111\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"ABSTRACTThe high-temperature mechanical properties of 310S stainless steel were investigated by uniaxial tensile tests and small punch tests at the temperature from 20℃ to 600℃, and the relationship between the mechanical properties (σYS ,σUTS) and the characteristic loads (Fy, Fm) was established. The results revealed that with increasing temperature, the mechanical properties of 310S decrease, and the characteristic loads obtained by Fy_Mao, Fy_EN and Fy_E3205 are more appropriate for determining the yield strength of materials at high temperatures particularly for Fy_E3205. The fracture pattern observed in the SPT specimens indicated a mixed tough-brittle fracture accompanied by the characteristics of cleavage fracture. Additionally, the ultimate tensile strength of the material and the maximum load Fm increased slightly at 400 ℃ compared to 300 ℃ due to the precipitation of a large number of granular carbides and the increase in the grain size.KEYWORDS: 310s steelSmall punch testHigh temperatureMechanical propertiesFracture Disclosure statementNo potential conflict of interest was reported by the author(s).Additional informationFundingThe work was supported by the National Natural Science Foundation of China (No.51705079), Natural Science Foundation of Fujian Province (No.2018J01767), Open Fund of Fujian Key Laboratory of Energy Measurement（Fujian Metrology Institute） (NYJL-KFKT-2022-02).\",\"PeriodicalId\":49877,\"journal\":{\"name\":\"Materials at High Temperatures\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.0000,\"publicationDate\":\"2023-11-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Materials at High Temperatures\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1080/09603409.2023.2281111\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materials at High Temperatures","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1080/09603409.2023.2281111","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}

引用次数: 0

摘要

摘要通过单轴拉伸试验和小冲孔试验，研究了310S不锈钢在20 ~ 600℃范围内的高温力学性能，建立了其力学性能(σYS、σUTS)与特征载荷(Fy、Fm)的关系。SPT试样的断裂模式为韧脆混合断裂，并伴有解理断裂特征。在400℃时，由于大量碳化物的析出和晶粒尺寸的增大，材料的极限抗拉强度和最大载荷Fm比300℃时略有提高。关键词:310s钢小冲床试验温度力学性能断裂披露声明作者未报告潜在的利益冲突。国家自然科学基金项目(No.51705079)、福建省自然科学基金项目(No.2018J01767)、福建省能源计量重点实验室开放基金项目(NYJL-KFKT-2022-02)资助。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

High-temperature mechanical properties evaluation of 310S stainless steel

ABSTRACTThe high-temperature mechanical properties of 310S stainless steel were investigated by uniaxial tensile tests and small punch tests at the temperature from 20℃ to 600℃, and the relationship between the mechanical properties (σYS ,σUTS) and the characteristic loads (Fy, Fm) was established. The results revealed that with increasing temperature, the mechanical properties of 310S decrease, and the characteristic loads obtained by Fy_Mao, Fy_EN and Fy_E3205 are more appropriate for determining the yield strength of materials at high temperatures particularly for Fy_E3205. The fracture pattern observed in the SPT specimens indicated a mixed tough-brittle fracture accompanied by the characteristics of cleavage fracture. Additionally, the ultimate tensile strength of the material and the maximum load Fm increased slightly at 400 ℃ compared to 300 ℃ due to the precipitation of a large number of granular carbides and the increase in the grain size.KEYWORDS: 310s steelSmall punch testHigh temperatureMechanical propertiesFracture Disclosure statementNo potential conflict of interest was reported by the author(s).Additional informationFundingThe work was supported by the National Natural Science Foundation of China (No.51705079), Natural Science Foundation of Fujian Province (No.2018J01767), Open Fund of Fujian Key Laboratory of Energy Measurement（Fujian Metrology Institute） (NYJL-KFKT-2022-02).

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Materials at High Temperatures 工程技术-材料科学：综合

CiteScore

1.90

自引率

15.40%

发文量

审稿时长

>12 weeks

期刊介绍： Materials at High Temperatures welcomes contributions relating to high temperature applications in the energy generation, aerospace, chemical and process industries. The effects of high temperatures and extreme environments on the corrosion and oxidation, fatigue, creep, strength and wear of metallic alloys, ceramics, intermetallics, and refractory and composite materials relative to these industries are covered. Papers on the modelling of behaviour and life prediction are also welcome, provided these are validated by experimental data and explicitly linked to actual or potential applications. Contributions addressing the needs of designers and engineers (e.g. standards and codes of practice) relative to the areas of interest of this journal also fall within the scope. The term ''high temperatures'' refers to the subsequent temperatures of application and not, for example, to those of processing itself. Materials at High Temperatures publishes regular thematic issues on topics of current interest. Proposals for issues are welcomed; please contact one of the Editors with details.