定子线圈和棒的局部放电测量推荐规程的制定

2014 International Conference on Advances in Communication and Computing Technologies (ICACACT 2014) Pub Date : 2014-08-01 DOI:10.1109/ICACACT.2014.7223538

W. McDermid

{"title":"定子线圈和棒的局部放电测量推荐规程的制定","authors":"W. McDermid","doi":"10.1109/ICACACT.2014.7223538","DOIUrl":null,"url":null,"abstract":"During the recent revision of IEEE 1434 Guide for the Measurement of Partial Discharges in AC Electric Machinery it became apparent that there is interest in developing a recommended practice for the measurement of PD from individual stator coils and bars. This would include measurements in the low frequency bandwidth specified by IEC 60270 as well as other bandwidths. To facilitate the work sample stator coils and bars with known defects as well as ones in good condition are required. The samples should be of moderate size to assist in the shipment of the samples between various laboratories for round robin testing. The measurements should determine the effect of conditioning and should also include measurements of insulation power factor and tip-up according to IEEE 286.","PeriodicalId":101532,"journal":{"name":"2014 International Conference on Advances in Communication and Computing Technologies (ICACACT 2014)","volume":"23 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2014-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Development of a recommended practice for the Measurement of PD from stator coils and bars\",\"authors\":\"W. McDermid\",\"doi\":\"10.1109/ICACACT.2014.7223538\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"During the recent revision of IEEE 1434 Guide for the Measurement of Partial Discharges in AC Electric Machinery it became apparent that there is interest in developing a recommended practice for the measurement of PD from individual stator coils and bars. This would include measurements in the low frequency bandwidth specified by IEC 60270 as well as other bandwidths. To facilitate the work sample stator coils and bars with known defects as well as ones in good condition are required. The samples should be of moderate size to assist in the shipment of the samples between various laboratories for round robin testing. The measurements should determine the effect of conditioning and should also include measurements of insulation power factor and tip-up according to IEEE 286.\",\"PeriodicalId\":101532,\"journal\":{\"name\":\"2014 International Conference on Advances in Communication and Computing Technologies (ICACACT 2014)\",\"volume\":\"23 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2014-08-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2014 International Conference on Advances in Communication and Computing Technologies (ICACACT 2014)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICACACT.2014.7223538\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2014 International Conference on Advances in Communication and Computing Technologies (ICACACT 2014)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICACACT.2014.7223538","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

在最近修订的IEEE 1434交流电机局部放电测量指南中，很明显，有兴趣开发一种推荐的实践方法来测量单个定子线圈和棒的局部放电。这将包括iec60270规定的低频带宽以及其他带宽的测量。为了便于样品的工作，定子线圈和定子棒既要有已知的缺陷，也要有完好的。样品应该是中等大小，以协助在不同实验室之间进行循环测试的样品运输。测量应确定调节的效果，还应根据IEEE 286测量绝缘功率因数和倾斜度。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Development of a recommended practice for the Measurement of PD from stator coils and bars

During the recent revision of IEEE 1434 Guide for the Measurement of Partial Discharges in AC Electric Machinery it became apparent that there is interest in developing a recommended practice for the measurement of PD from individual stator coils and bars. This would include measurements in the low frequency bandwidth specified by IEC 60270 as well as other bandwidths. To facilitate the work sample stator coils and bars with known defects as well as ones in good condition are required. The samples should be of moderate size to assist in the shipment of the samples between various laboratories for round robin testing. The measurements should determine the effect of conditioning and should also include measurements of insulation power factor and tip-up according to IEEE 286.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2014 International Conference on Advances in Communication and Computing Technologies (ICACACT 2014)

自引率

0.00%

发文量