{"title":"空降兵战车轮上滚轮拆装辅助装置的设计","authors":"Nur Maryanto, Fajar Apit, Ismanto Setyabudi","doi":"10.54317/oto.v2ioktober.169","DOIUrl":null,"url":null,"abstract":"The Army has a combat vehicle Panser ANOA 6x6 which is produced by PT. Pindad. The Panzer model combat vehicle has a number of 6 large wheels with a diameter of 1300 mm and a weight of 250 Kg on each wheel. A large number of vehicles are not supported by 'Special tool' or equipment that has a function to facilitate heavy work that has a high risk of work accidents. Therefore, a Panser wheel release and installer are made with a Roller buttress as a lift pad and the Panser wheel player is quite operated by one personnel. The method used in this study is an experimental method to find out the results of analysis on roller and wheel installer Panser ANOA 6x6. The loading received at roller construction is 1226.25 N, the bending pressure of the shaft is 546.18 N/mm2, the bending moment of the shaft is 429.19 Nm, the shaft mass is 1.7 Kg. The Roller tube flexing pressure is 879.05 N/mm2, the bending moment is 416.93 Nm and the Roller tube mass is 2.84 Kg. Welding Pressure Roller is 0.325 N/mm2. Faced with the modulus value of ST40 steel elasticity, roller construction is very capable of receiving panzer Anoa 6x6 wheel load. \n \n Keywords: Construction, Roller, Pressure, Moment","PeriodicalId":285927,"journal":{"name":"Jurnal Otoranpur","volume":"25 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2020-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"The DESIGN OF ROLLER ON WHEELS REMOVAL AND INSTALLER AIDS ON ANOA PANSER COMBAT VEHICLE\",\"authors\":\"Nur Maryanto, Fajar Apit, Ismanto Setyabudi\",\"doi\":\"10.54317/oto.v2ioktober.169\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The Army has a combat vehicle Panser ANOA 6x6 which is produced by PT. Pindad. The Panzer model combat vehicle has a number of 6 large wheels with a diameter of 1300 mm and a weight of 250 Kg on each wheel. A large number of vehicles are not supported by 'Special tool' or equipment that has a function to facilitate heavy work that has a high risk of work accidents. Therefore, a Panser wheel release and installer are made with a Roller buttress as a lift pad and the Panser wheel player is quite operated by one personnel. The method used in this study is an experimental method to find out the results of analysis on roller and wheel installer Panser ANOA 6x6. The loading received at roller construction is 1226.25 N, the bending pressure of the shaft is 546.18 N/mm2, the bending moment of the shaft is 429.19 Nm, the shaft mass is 1.7 Kg. The Roller tube flexing pressure is 879.05 N/mm2, the bending moment is 416.93 Nm and the Roller tube mass is 2.84 Kg. Welding Pressure Roller is 0.325 N/mm2. Faced with the modulus value of ST40 steel elasticity, roller construction is very capable of receiving panzer Anoa 6x6 wheel load. \\n \\n Keywords: Construction, Roller, Pressure, Moment\",\"PeriodicalId\":285927,\"journal\":{\"name\":\"Jurnal Otoranpur\",\"volume\":\"25 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-10-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Jurnal Otoranpur\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.54317/oto.v2ioktober.169\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Jurnal Otoranpur","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.54317/oto.v2ioktober.169","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
The DESIGN OF ROLLER ON WHEELS REMOVAL AND INSTALLER AIDS ON ANOA PANSER COMBAT VEHICLE
The Army has a combat vehicle Panser ANOA 6x6 which is produced by PT. Pindad. The Panzer model combat vehicle has a number of 6 large wheels with a diameter of 1300 mm and a weight of 250 Kg on each wheel. A large number of vehicles are not supported by 'Special tool' or equipment that has a function to facilitate heavy work that has a high risk of work accidents. Therefore, a Panser wheel release and installer are made with a Roller buttress as a lift pad and the Panser wheel player is quite operated by one personnel. The method used in this study is an experimental method to find out the results of analysis on roller and wheel installer Panser ANOA 6x6. The loading received at roller construction is 1226.25 N, the bending pressure of the shaft is 546.18 N/mm2, the bending moment of the shaft is 429.19 Nm, the shaft mass is 1.7 Kg. The Roller tube flexing pressure is 879.05 N/mm2, the bending moment is 416.93 Nm and the Roller tube mass is 2.84 Kg. Welding Pressure Roller is 0.325 N/mm2. Faced with the modulus value of ST40 steel elasticity, roller construction is very capable of receiving panzer Anoa 6x6 wheel load.
Keywords: Construction, Roller, Pressure, Moment
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
