- Book学术

发布求助

文献互助智能选刊最新文献

Journal of Renewable Energy & Mechanics (REM) Pub Date : 2019-09-30 DOI:10.25299/rem.2019.vol2.no02.3532

Arya Sutrisna, Syawaldi Kamaharudin, Dedikarni Panuh, J. Raharjo

{"title":"PERANCANGAN MESIN PENGHANCUR DAUN KERING MENGGUNAKAN LIMA MATA PISAU","authors":"Arya Sutrisna, Syawaldi Kamaharudin, Dedikarni Panuh, J. Raharjo","doi":"10.25299/rem.2019.vol2.no02.3532","DOIUrl":null,"url":null,"abstract":"ABSTRAK \nSebagai penelitian Tugas akhir dengan judul”Perancangan Mesin Penghancur Daun Kering Menggunakan Lima Mata Pisau”. Perancangan mesin ini bertujuan untuk mendapatkan suatu mesin penghancur daun-daunan kering. Untuk mendapatkan ukuran kehalusan daun dari proses pengolahan mesin penghancur daun-daunan kering. Untuk mendapatkan kapasitas produksi olahan dari mesin. Proses perancangan mesin penghancur daun kering dilakukan dengan tahapan yaitu perancangan dan penjelasan tugas/fungsi, perancangan konsep produk (gambar kerja). Analisis teknik meliputi analisis daya dan kecepatan yang terjadi pada poros. Tenaga penggerak mesin penghancur dedaunan kering direncanakan menggunakan motor listrik yang disesuaikan dengan kemampuan daya listrik untuk UKM yang diperkirakan rata-rata berkisar 900 sampai 1300 watt. Hasil dari perancangan mesin perancangan daun kering dengan kapasitas produksi 32 kg/jam, dan dimensi mesin panjang 60 cm x lebar 60 cm x tinggi 100 cm, mengunakan tenaga pengerak berupa motor listrik 1/2 HP 1400 rpm, rangka mengunakan siku profil L 40 x 40 x 4 mm. Hasil uji kinerja memperlihatkan bahwa mesin bekerja cukup baik, dan dapat menghasilkan kehalusan cacahan dedauan berukuran 5-10 mm. \nKata kunci : Mesin penghancur daun, Daya, Putaran, Kapasitas Produksi \nABSTRACT \nAs a final project research with the title \"Designing Dry Leaves Crushing Machine Using Five Blades\". The design of this machine aims to obtain a dry leaf shredder. To get the size of the fineness of the leaves from the processing of the dried leaf crusher. To get the processed production capacity from the machine. The process of designing dry leaf shredder is done by stages, namely design and explanation of tasks / functions, design of product concepts (working drawings). Technical analysis includes analysis of power and speed that occurs on the shaft. The driving force of the dry foliage crusher is planned to use an electric motor that is adjusted to the ability of electric power for SMEs which is estimated to average around 900 to 1300 watts. The results of the design of dry leaf design machines with a production capacity of 32 kg / hour, and dimensions of the length of the machine 60 cm x width 60 cm x height 100 cm, using power in the form of 1/2 HP 1400 rpm electric motor, frame using L 40 x elbow profile 40 x 4 mm. The performance test results show that the machine works quite well, and can produce fineness of leaves measuring 5-10 mm. \nKeywords: leaf shredder, shaft power, speed, production capacity","PeriodicalId":168869,"journal":{"name":"Journal of Renewable Energy & Mechanics (REM)","volume":"37 16","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2019-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Renewable Energy & Mechanics (REM)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.25299/rem.2019.vol2.no02.3532","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

摘要作为最后一项任务的研究，标题为“用五把刀片设计干叶碎纸机”。这种设计的目的是得到一台干树叶碎屑机。从干叶碎屑机的加工过程中得到叶子的微细。从机器获得加工能力。干叶压碎机的设计过程是按照设计和解释任务/功能、产品概念(工作图片)的步骤进行的。工程分析包括轴的动力和速度分析。一种用于除枯叶的破坏机器的发动机，其设计用途是一种以平均为900至1300瓦的UKM电力为同步的电动机。设计干叶机的生产能力为每小时32公斤，引擎尺寸为长60厘米，宽60厘米，宽100厘米，使用电动马达1/2马力1400转/分钟，骨架使用肘L 40×40×4毫米。性能测试结果显示，这些机器运转良好，可以产生5到10毫米的柳絮。关键词:落叶碎纸机、动力、旋转、抽象生产能力，标题为“设计干叶机，使用5把刀片”。这些机器aims的设计暴露了一个干叶碎纸机。从钻叶机的加工中得到思念的大小。从机器获得适当的生产能力。干页碎纸机由stages、namely设计和expltion的职责、生产构思。技术分析包括轴上的力和速度分析。钢化破碎机上的流动动力被设计成使用一种电动机，这种动力被估计在900到1300瓦附近。results》设计的干叶设计机器with a production capacity of 32公斤/小时,机器和维度的长度正好》60厘米×教室60厘米×高地100厘米,用power in The form of用L / HP 1400转速电机,帧40×肘部低调40×4毫米。性能测试显示，这条机器运转得很好，可以生产出10到10毫米的叶子。叶片碎纸，轴电源，速度，生产电容器

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

PERANCANGAN MESIN PENGHANCUR DAUN KERING MENGGUNAKAN LIMA MATA PISAU

ABSTRAK Sebagai penelitian Tugas akhir dengan judul”Perancangan Mesin Penghancur Daun Kering Menggunakan Lima Mata Pisau”. Perancangan mesin ini bertujuan untuk mendapatkan suatu mesin penghancur daun-daunan kering. Untuk mendapatkan ukuran kehalusan daun dari proses pengolahan mesin penghancur daun-daunan kering. Untuk mendapatkan kapasitas produksi olahan dari mesin. Proses perancangan mesin penghancur daun kering dilakukan dengan tahapan yaitu perancangan dan penjelasan tugas/fungsi, perancangan konsep produk (gambar kerja). Analisis teknik meliputi analisis daya dan kecepatan yang terjadi pada poros. Tenaga penggerak mesin penghancur dedaunan kering direncanakan menggunakan motor listrik yang disesuaikan dengan kemampuan daya listrik untuk UKM yang diperkirakan rata-rata berkisar 900 sampai 1300 watt. Hasil dari perancangan mesin perancangan daun kering dengan kapasitas produksi 32 kg/jam, dan dimensi mesin panjang 60 cm x lebar 60 cm x tinggi 100 cm, mengunakan tenaga pengerak berupa motor listrik 1/2 HP 1400 rpm, rangka mengunakan siku profil L 40 x 40 x 4 mm. Hasil uji kinerja memperlihatkan bahwa mesin bekerja cukup baik, dan dapat menghasilkan kehalusan cacahan dedauan berukuran 5-10 mm. Kata kunci : Mesin penghancur daun, Daya, Putaran, Kapasitas Produksi ABSTRACT As a final project research with the title "Designing Dry Leaves Crushing Machine Using Five Blades". The design of this machine aims to obtain a dry leaf shredder. To get the size of the fineness of the leaves from the processing of the dried leaf crusher. To get the processed production capacity from the machine. The process of designing dry leaf shredder is done by stages, namely design and explanation of tasks / functions, design of product concepts (working drawings). Technical analysis includes analysis of power and speed that occurs on the shaft. The driving force of the dry foliage crusher is planned to use an electric motor that is adjusted to the ability of electric power for SMEs which is estimated to average around 900 to 1300 watts. The results of the design of dry leaf design machines with a production capacity of 32 kg / hour, and dimensions of the length of the machine 60 cm x width 60 cm x height 100 cm, using power in the form of 1/2 HP 1400 rpm electric motor, frame using L 40 x elbow profile 40 x 4 mm. The performance test results show that the machine works quite well, and can produce fineness of leaves measuring 5-10 mm. Keywords: leaf shredder, shaft power, speed, production capacity

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Journal of Renewable Energy & Mechanics (REM)

自引率

0.00%

发文量