{"title":"旋流对环形扩压器压力恢复的影响","authors":"D. S. Kumar, K. L. Kumar","doi":"10.1243/JMES_JOUR_1980_022_056_02","DOIUrl":null,"url":null,"abstract":"Annular diffusers are likely to operate with varying amounts of swirl at the inlet. The work described in this paper is concerned mainly with an experimental investigation of subsonic turbulent swirling flows through annular diffusers having diverging hub and casing boundaries. The test facility was designed SO as to peImit different levels of inlet swirl. The static pressure distributions and the axial and tangential velocity profiles were measured with the help of a three-hole cobra probe suitably mounted at different cross sections along the diffuser length. The diffuser performance parameters such as static-pressure recovery, effectiveness, and the total pressure loss coefficient were then computed from the experimental observations. The behaviour of these parameters has been discussed to establish the effect of swirl. The presence of inlet swirl was found to increase the overall static-pressure recovery. A substantial increase in the pressure recovery occurred over the initial stages of diffusion and...","PeriodicalId":114598,"journal":{"name":"Archive: Journal of Mechanical Engineering Science 1959-1982 (vols 1-23)","volume":"94 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1980-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"25","resultStr":"{\"title\":\"Effect of Swirl on Pressure Recovery in Annular Diffusers\",\"authors\":\"D. S. Kumar, K. L. Kumar\",\"doi\":\"10.1243/JMES_JOUR_1980_022_056_02\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Annular diffusers are likely to operate with varying amounts of swirl at the inlet. The work described in this paper is concerned mainly with an experimental investigation of subsonic turbulent swirling flows through annular diffusers having diverging hub and casing boundaries. The test facility was designed SO as to peImit different levels of inlet swirl. The static pressure distributions and the axial and tangential velocity profiles were measured with the help of a three-hole cobra probe suitably mounted at different cross sections along the diffuser length. The diffuser performance parameters such as static-pressure recovery, effectiveness, and the total pressure loss coefficient were then computed from the experimental observations. The behaviour of these parameters has been discussed to establish the effect of swirl. The presence of inlet swirl was found to increase the overall static-pressure recovery. A substantial increase in the pressure recovery occurred over the initial stages of diffusion and...\",\"PeriodicalId\":114598,\"journal\":{\"name\":\"Archive: Journal of Mechanical Engineering Science 1959-1982 (vols 1-23)\",\"volume\":\"94 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1980-12-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"25\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Archive: Journal of Mechanical Engineering Science 1959-1982 (vols 1-23)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1243/JMES_JOUR_1980_022_056_02\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Archive: Journal of Mechanical Engineering Science 1959-1982 (vols 1-23)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1243/JMES_JOUR_1980_022_056_02","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Effect of Swirl on Pressure Recovery in Annular Diffusers
Annular diffusers are likely to operate with varying amounts of swirl at the inlet. The work described in this paper is concerned mainly with an experimental investigation of subsonic turbulent swirling flows through annular diffusers having diverging hub and casing boundaries. The test facility was designed SO as to peImit different levels of inlet swirl. The static pressure distributions and the axial and tangential velocity profiles were measured with the help of a three-hole cobra probe suitably mounted at different cross sections along the diffuser length. The diffuser performance parameters such as static-pressure recovery, effectiveness, and the total pressure loss coefficient were then computed from the experimental observations. The behaviour of these parameters has been discussed to establish the effect of swirl. The presence of inlet swirl was found to increase the overall static-pressure recovery. A substantial increase in the pressure recovery occurred over the initial stages of diffusion and...