Theoretical Validation of an Analytical Design Method for Beveloid Gears With Non-Parallel Non-Intersecting Axes

An analytical calculation method was developed to determine the main gearing data for beveloid gears with non-parallel non-intersecting axes. To validate the method and identify its limits, a parameter study was to be conducted. A two-stage fractional factorial experimental design was therefore devised to deliberately vary the gearing parameters. For each gearing, an unloaded contact simulation was carried out using the position of the contact pattern, the transmission error and the predefined gear backlash as quality characteristics. The results of the simulation were subsequently classified in three evaluation categories. Due to the generalizability of the method proposed, it can also be used for the design of other involute gearings. A modification of the equations revealed its applicability for spur gear pairs with no shaft angle and for crossed helical gear pairs with shaft angles up to 90°. The results for the beveloid gear pairs investigated using a wide range of parameters as well as those for the cylindrical and crossed helical gear pairs proved the validity of the method. In the case of outliers in the evaluation, the causes were identified and corrective actions were presented.