电火花切割- hs法加工1060铝氧化膜的实验研究

2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) Pub Date : 2016-07-01 DOI:10.1109/3M-NANO.2016.7824962

Dongjie Cheng, G. Shi, G. Shi, Zhenguo Xu, K. Zhu

{"title":"电火花切割- hs法加工1060铝氧化膜的实验研究","authors":"Dongjie Cheng, G. Shi, G. Shi, Zhenguo Xu, K. Zhu","doi":"10.1109/3M-NANO.2016.7824962","DOIUrl":null,"url":null,"abstract":"In order to study the oxide film of 1060 aluminum (Al) by using high-speed wire electrical discharge machining (WEDM-HS), XRD, SEM and Marr profile measuring instrument were used to observe the oxide film on the surface of the phase composition, surface morphology and roughness. The results have shown that under the conditions of this test, by using WEDM-HS machining 1060Al, the oxide film on the surface is formed Al2O3 phase. And gradually decreasing the pulse width, the phase composition of the oxide film will not change. Morphology of the oxide film on the surface is made up of micron order of magnitude of the honeycomb holes. Roughness on the surface of the oxide film gradually decreases.","PeriodicalId":273846,"journal":{"name":"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)","volume":"2 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Experimental study on the oxide film of 1060 aluminum by using WEDM-HS\",\"authors\":\"Dongjie Cheng, G. Shi, G. Shi, Zhenguo Xu, K. Zhu\",\"doi\":\"10.1109/3M-NANO.2016.7824962\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In order to study the oxide film of 1060 aluminum (Al) by using high-speed wire electrical discharge machining (WEDM-HS), XRD, SEM and Marr profile measuring instrument were used to observe the oxide film on the surface of the phase composition, surface morphology and roughness. The results have shown that under the conditions of this test, by using WEDM-HS machining 1060Al, the oxide film on the surface is formed Al2O3 phase. And gradually decreasing the pulse width, the phase composition of the oxide film will not change. Morphology of the oxide film on the surface is made up of micron order of magnitude of the honeycomb holes. Roughness on the surface of the oxide film gradually decreases.\",\"PeriodicalId\":273846,\"journal\":{\"name\":\"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)\",\"volume\":\"2 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-07-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/3M-NANO.2016.7824962\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/3M-NANO.2016.7824962","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

为了研究采用高速线切割加工(WEDM-HS)法制备的1060铝(Al)氧化膜，采用XRD、SEM和Marr剖面测量仪对氧化膜表面的物相组成、表面形貌和粗糙度进行了观察。结果表明:在本试验条件下，采用线切割- hs加工1060Al，表面氧化膜形成Al2O3相。而随着脉冲宽度的逐渐减小，氧化膜的相组成不会发生变化。表面氧化膜的形态由微米量级的蜂窝孔组成。氧化膜表面的粗糙度逐渐降低。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Experimental study on the oxide film of 1060 aluminum by using WEDM-HS

In order to study the oxide film of 1060 aluminum (Al) by using high-speed wire electrical discharge machining (WEDM-HS), XRD, SEM and Marr profile measuring instrument were used to observe the oxide film on the surface of the phase composition, surface morphology and roughness. The results have shown that under the conditions of this test, by using WEDM-HS machining 1060Al, the oxide film on the surface is formed Al2O3 phase. And gradually decreasing the pulse width, the phase composition of the oxide film will not change. Morphology of the oxide film on the surface is made up of micron order of magnitude of the honeycomb holes. Roughness on the surface of the oxide film gradually decreases.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO)

自引率

0.00%

发文量