气动轴承触头位移传感器接触特性分析

International Symposium on Precision Engineering Measurement and Instrumentation Pub Date : 2019-03-07 DOI:10.1117/12.2511216

W. Hao, Su-ping Chang, Jianfei Zhou, Chunbing Hu, Zhongyu Zhang

{"title":"气动轴承触头位移传感器接触特性分析","authors":"W. Hao, Su-ping Chang, Jianfei Zhou, Chunbing Hu, Zhongyu Zhang","doi":"10.1117/12.2511216","DOIUrl":null,"url":null,"abstract":"In this paper, the dynamic and static contact characteristics of the aerostatic bearing stylus displacement sensor are analyzed, including static contact damage and dynamic response. The dynamic response at frequency and different speeds is studied and obtained the relationship between the measured force and frequency and velocity. The stylus does not contact well from the surface when the measuring force is less than 0. In this case, the traceability of the tip can be analyzed based on the characteristics of the amplitude. Finally, the experimental verification of the relevant theory is obtained by measuring the aluminum turning sample at different speeds.","PeriodicalId":115119,"journal":{"name":"International Symposium on Precision Engineering Measurement and Instrumentation","volume":"29 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2019-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Analysis of contacting characteristics on aerostatic bearing stylus displacement sensor\",\"authors\":\"W. Hao, Su-ping Chang, Jianfei Zhou, Chunbing Hu, Zhongyu Zhang\",\"doi\":\"10.1117/12.2511216\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, the dynamic and static contact characteristics of the aerostatic bearing stylus displacement sensor are analyzed, including static contact damage and dynamic response. The dynamic response at frequency and different speeds is studied and obtained the relationship between the measured force and frequency and velocity. The stylus does not contact well from the surface when the measuring force is less than 0. In this case, the traceability of the tip can be analyzed based on the characteristics of the amplitude. Finally, the experimental verification of the relevant theory is obtained by measuring the aluminum turning sample at different speeds.\",\"PeriodicalId\":115119,\"journal\":{\"name\":\"International Symposium on Precision Engineering Measurement and Instrumentation\",\"volume\":\"29 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-03-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Symposium on Precision Engineering Measurement and Instrumentation\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1117/12.2511216\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Symposium on Precision Engineering Measurement and Instrumentation","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1117/12.2511216","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

本文分析了空气静压轴承触针位移传感器的动、静态接触特性，包括静态接触损伤和动态响应。研究了频率和不同速度下的动态响应，得到了测力与频率和速度的关系。当测量力小于0时，触针与表面接触不良。在这种情况下，可以根据振幅的特征来分析尖端的可追溯性。最后，通过测量不同转速下的铝车削试样，对相关理论进行了实验验证。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Analysis of contacting characteristics on aerostatic bearing stylus displacement sensor

In this paper, the dynamic and static contact characteristics of the aerostatic bearing stylus displacement sensor are analyzed, including static contact damage and dynamic response. The dynamic response at frequency and different speeds is studied and obtained the relationship between the measured force and frequency and velocity. The stylus does not contact well from the surface when the measuring force is less than 0. In this case, the traceability of the tip can be analyzed based on the characteristics of the amplitude. Finally, the experimental verification of the relevant theory is obtained by measuring the aluminum turning sample at different speeds.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

International Symposium on Precision Engineering Measurement and Instrumentation

自引率

0.00%

发文量