基于IIR基函数的多项式的三端口射频功率放大器建模

M. Masood, C. Rey, S. Kenney, G. Norris, R. Sherman
{"title":"基于IIR基函数的多项式的三端口射频功率放大器建模","authors":"M. Masood, C. Rey, S. Kenney, G. Norris, R. Sherman","doi":"10.1109/RWS.2010.5434219","DOIUrl":null,"url":null,"abstract":"This paper presents a scheme of modeling radio frequency (RF) power amplifier (PAs) for 3-port applications by including modeling of bias port of PA along with its input and output ports. This scheme uses polynomials with infinite impulse response (IIR) bases functions for modeling non-linear behavior of PA as well as its short and long term memory effects. Power amplifiers designed for third generation (WCDMA) wireless system are investigated for the validation of modeling scheme. Excellent results are obtained, where the error between model prediction and measurements is better than 43 dBc for a wide range of bias voltages, with the amplifier being driven with a WCDMA signal at several power levels.","PeriodicalId":334671,"journal":{"name":"2010 IEEE Radio and Wireless Symposium (RWS)","volume":"312 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2010-01-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"4","resultStr":"{\"title\":\"RF power amplifier modeling for three-port applications using polynomials with IIR bases functions\",\"authors\":\"M. Masood, C. Rey, S. Kenney, G. Norris, R. Sherman\",\"doi\":\"10.1109/RWS.2010.5434219\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents a scheme of modeling radio frequency (RF) power amplifier (PAs) for 3-port applications by including modeling of bias port of PA along with its input and output ports. This scheme uses polynomials with infinite impulse response (IIR) bases functions for modeling non-linear behavior of PA as well as its short and long term memory effects. Power amplifiers designed for third generation (WCDMA) wireless system are investigated for the validation of modeling scheme. Excellent results are obtained, where the error between model prediction and measurements is better than 43 dBc for a wide range of bias voltages, with the amplifier being driven with a WCDMA signal at several power levels.\",\"PeriodicalId\":334671,\"journal\":{\"name\":\"2010 IEEE Radio and Wireless Symposium (RWS)\",\"volume\":\"312 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2010-01-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"4\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2010 IEEE Radio and Wireless Symposium (RWS)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/RWS.2010.5434219\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2010 IEEE Radio and Wireless Symposium (RWS)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/RWS.2010.5434219","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 4

摘要

本文提出了一种用于三端口应用的射频功率放大器的建模方案,包括对射频功率放大器的偏置端口及其输入输出端口的建模。该方案使用具有无限脉冲响应(IIR)基函数的多项式来建模PA的非线性行为及其短期和长期记忆效应。研究了用于第三代无线系统(WCDMA)的功率放大器,验证了建模方案的有效性。在多个功率级的WCDMA信号驱动下,在较宽的偏置电压范围内,模型预测与测量之间的误差小于43 dBc。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
RF power amplifier modeling for three-port applications using polynomials with IIR bases functions
This paper presents a scheme of modeling radio frequency (RF) power amplifier (PAs) for 3-port applications by including modeling of bias port of PA along with its input and output ports. This scheme uses polynomials with infinite impulse response (IIR) bases functions for modeling non-linear behavior of PA as well as its short and long term memory effects. Power amplifiers designed for third generation (WCDMA) wireless system are investigated for the validation of modeling scheme. Excellent results are obtained, where the error between model prediction and measurements is better than 43 dBc for a wide range of bias voltages, with the amplifier being driven with a WCDMA signal at several power levels.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信