在45nm RFSOI中使用RX-TX系统封装集成多lo发生器的56.32 Gb/s 16 qam d波段无线链路

A. Hamani, F. F. Manzillo, A. Siligaris, N. Cassiau, F. Hameau, F. Chaix, C. Dehos, A. Clemente, J. González-Jiménez
{"title":"在45nm RFSOI中使用RX-TX系统封装集成多lo发生器的56.32 Gb/s 16 qam d波段无线链路","authors":"A. Hamani, F. F. Manzillo, A. Siligaris, N. Cassiau, F. Hameau, F. Chaix, C. Dehos, A. Clemente, J. González-Jiménez","doi":"10.1109/RFIC54546.2022.9863127","DOIUrl":null,"url":null,"abstract":"This paper presents an energy-efficient wideband D- band wireless link using receiver (RX) and transmitter (TX) modules based on a channel-bonding scheme. The modules include RX and TX integrated circuits (ICs) fabricated in 45nm CMOS RFSOI technology. They are mounted on low-cost multi-layer printed circuit boards (PCBs) and connected to patch antennas. The RX and TX ICs are composed of two down-conversion and up-conversion chains, respectively, operating over contiguous sub- bands around 147.96 GHz. The required multiple millimeter-wave local oscillator signals (LOs)are generated on-chip. The presented wireless system achieves a data rate of 56.32 Gb/s by using 16 QAM modulation over 8 radiofrequency (RF) channels, with a competitive energy consumption (RX+TX) of 18 pJ/bit, including the LOs generation circuitry.","PeriodicalId":415294,"journal":{"name":"2022 IEEE Radio Frequency Integrated Circuits Symposium (RFIC)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-06-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"7","resultStr":"{\"title\":\"A 56.32 Gb/s 16-QAM D-band Wireless Link using RX-TX Systems- in-Package with Integrated Multi-LO Generators in 45nm RFSOI\",\"authors\":\"A. Hamani, F. F. Manzillo, A. Siligaris, N. Cassiau, F. Hameau, F. Chaix, C. Dehos, A. Clemente, J. González-Jiménez\",\"doi\":\"10.1109/RFIC54546.2022.9863127\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents an energy-efficient wideband D- band wireless link using receiver (RX) and transmitter (TX) modules based on a channel-bonding scheme. The modules include RX and TX integrated circuits (ICs) fabricated in 45nm CMOS RFSOI technology. They are mounted on low-cost multi-layer printed circuit boards (PCBs) and connected to patch antennas. The RX and TX ICs are composed of two down-conversion and up-conversion chains, respectively, operating over contiguous sub- bands around 147.96 GHz. The required multiple millimeter-wave local oscillator signals (LOs)are generated on-chip. The presented wireless system achieves a data rate of 56.32 Gb/s by using 16 QAM modulation over 8 radiofrequency (RF) channels, with a competitive energy consumption (RX+TX) of 18 pJ/bit, including the LOs generation circuitry.\",\"PeriodicalId\":415294,\"journal\":{\"name\":\"2022 IEEE Radio Frequency Integrated Circuits Symposium (RFIC)\",\"volume\":\"1 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-06-19\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"7\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2022 IEEE Radio Frequency Integrated Circuits Symposium (RFIC)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/RFIC54546.2022.9863127\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2022 IEEE Radio Frequency Integrated Circuits Symposium (RFIC)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/RFIC54546.2022.9863127","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 7

摘要

本文提出了一种基于信道绑定方案,利用接收(RX)和发送(TX)模块实现节能的宽带D波段无线链路。这些模块包括采用45nm CMOS RFSOI技术制造的RX和TX集成电路(ic)。它们安装在低成本的多层印刷电路板(pcb)上,并连接到贴片天线上。RX和TX ic分别由两个下转换和上转换链组成,在147.96 GHz左右的连续子频带上工作。所需的多个毫米波本振信号(LOs)在片上生成。该无线系统采用8个射频(RF)通道的16个QAM调制,数据速率达到56.32 Gb/s,包括LOs产生电路在内的竞争能耗(RX+TX)为18 pJ/bit。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
A 56.32 Gb/s 16-QAM D-band Wireless Link using RX-TX Systems- in-Package with Integrated Multi-LO Generators in 45nm RFSOI
This paper presents an energy-efficient wideband D- band wireless link using receiver (RX) and transmitter (TX) modules based on a channel-bonding scheme. The modules include RX and TX integrated circuits (ICs) fabricated in 45nm CMOS RFSOI technology. They are mounted on low-cost multi-layer printed circuit boards (PCBs) and connected to patch antennas. The RX and TX ICs are composed of two down-conversion and up-conversion chains, respectively, operating over contiguous sub- bands around 147.96 GHz. The required multiple millimeter-wave local oscillator signals (LOs)are generated on-chip. The presented wireless system achieves a data rate of 56.32 Gb/s by using 16 QAM modulation over 8 radiofrequency (RF) channels, with a competitive energy consumption (RX+TX) of 18 pJ/bit, including the LOs generation circuitry.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信