Refinement of the rail–wheel contact pair to improve rail–wheel interaction conditions for railway vehicles with an increased axle load

At present, one of the global trends in railway transport development, which becomes clearer and clearer, is increasing the axle load of freight cars, which gives a considerable economic benefit. In this connection, of importance is not only the car design, but also the car capacity utilization factor: the higher this factor, the more economically efficient the car use. Because of this, one of the priority global lines in increasing the volume of fright traffic and the railway operation efficiency is increasing the carrying capacity of freight cars. Preparing the railways for cars with increased axle loads calls for the development of measures to decrease the track deformability, in particular by choosing appropriate wheel and rail profiles. The aim of this work was to develop recommendations on refining the wheel?rail contact pair to improve curve negotiation by railway vehicles with an increased axle loads on the Ukrainian railways. This paper presents the proprietary R-ITM wear-resistant railhead profile. The effect of the new profile on wheel?rail interaction in negotiating a curve of radius 300 m at a constant speed was studied for different cars. In doing so, emphasis was on wheel?rail interaction for a new-generation freight car on 18-9817 trucks with an axle load increased to 36 tf. The studies conducted made it possible to formulate the following recommendations: to improve curve negotiation by railway vehicles with increased axle loads, reduce the adverse effect on the track and improve traffic safety, new proprietary contact pair profiles are recommended: the ITM-73-03 wheel profile for cars, and the R-ITM railhead profile for outer rails together with the standard R65 railhead profile for inner rails.