电磁流量计的二维有限元模拟

2008 11th International Conference on Optimization of Electrical and Electronic Equipment Pub Date : 2008-05-22 DOI:10.1109/OPTIM.2008.4602345

M.A. Rodriguez, D. Morinigo, J. Fernandez, R. Cuesta, J. Maroto

{"title":"电磁流量计的二维有限元模拟","authors":"M.A. Rodriguez, D. Morinigo, J. Fernandez, R. Cuesta, J. Maroto","doi":"10.1109/OPTIM.2008.4602345","DOIUrl":null,"url":null,"abstract":"A computational investigation was carried out in a contactless electromagnetic induction flowmeter to measure the velocity of molten aluminum flowing though a ceramic duct. This paper includes the simulation and the experimental validation using as a reference the electromagnetic induction flowmeter and the experimental test. The results make it possible to demonstrate the reliability of the simulation of the electromagnetic induction flowmeter, using ANSYS. This work provides the process for the simulation of an contacless electromagnetic induction flowmeter to measure the flowrate of molten aluminum in the EPGS (Electromagnetic Pump Green Sand) casting process.","PeriodicalId":244464,"journal":{"name":"2008 11th International Conference on Optimization of Electrical and Electronic Equipment","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2008-05-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"2-D FEM simulation of an electromagnetic flowmeter\",\"authors\":\"M.A. Rodriguez, D. Morinigo, J. Fernandez, R. Cuesta, J. Maroto\",\"doi\":\"10.1109/OPTIM.2008.4602345\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A computational investigation was carried out in a contactless electromagnetic induction flowmeter to measure the velocity of molten aluminum flowing though a ceramic duct. This paper includes the simulation and the experimental validation using as a reference the electromagnetic induction flowmeter and the experimental test. The results make it possible to demonstrate the reliability of the simulation of the electromagnetic induction flowmeter, using ANSYS. This work provides the process for the simulation of an contacless electromagnetic induction flowmeter to measure the flowrate of molten aluminum in the EPGS (Electromagnetic Pump Green Sand) casting process.\",\"PeriodicalId\":244464,\"journal\":{\"name\":\"2008 11th International Conference on Optimization of Electrical and Electronic Equipment\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2008-05-22\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2008 11th International Conference on Optimization of Electrical and Electronic Equipment\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/OPTIM.2008.4602345\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2008 11th International Conference on Optimization of Electrical and Electronic Equipment","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/OPTIM.2008.4602345","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

采用非接触式电磁感应流量计对铝液在陶瓷管道中的流动速度进行了计算研究。本文以电磁感应流量计为参考，进行了仿真和实验验证，并进行了实验测试。研究结果证明了利用ANSYS对电磁感应流量计进行仿真的可靠性。本工作为非接触式电磁感应流量计在EPGS(电磁泵绿砂)铸造过程中测量铝液流量提供了仿真过程。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

2-D FEM simulation of an electromagnetic flowmeter

A computational investigation was carried out in a contactless electromagnetic induction flowmeter to measure the velocity of molten aluminum flowing though a ceramic duct. This paper includes the simulation and the experimental validation using as a reference the electromagnetic induction flowmeter and the experimental test. The results make it possible to demonstrate the reliability of the simulation of the electromagnetic induction flowmeter, using ANSYS. This work provides the process for the simulation of an contacless electromagnetic induction flowmeter to measure the flowrate of molten aluminum in the EPGS (Electromagnetic Pump Green Sand) casting process.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2008 11th International Conference on Optimization of Electrical and Electronic Equipment

自引率

0.00%

发文量