尼日利亚尼日尔三角洲巴耶尔萨州叶纳戈阿部分地区基础设计的岩土工程考虑

P.N John, G. J. Udom, A.C Tse
{"title":"尼日利亚尼日尔三角洲巴耶尔萨州叶纳戈阿部分地区基础设计的岩土工程考虑","authors":"P.N John, G. J. Udom, A.C Tse","doi":"10.37745/bjesr.2013/vol11n45062","DOIUrl":null,"url":null,"abstract":"This research was to determine geotechnical properties of the subsoils in some part of Yenagoa and environs to obtain proper foundation design parameters, six towns in Yenagoa local government area, Bayelsa state was investigated. Six geotechnical boreholes was drilled and laboratory studies of soils samples were obtained from 0-20.25m deep. Subsurface soil profiles were delineated followed by determination of their index and mechanical properties, including Atterberg limits, particle sizes distribution, undrained shear strength, shear box test and consolidation coefficient. The general soil profile consists of (from top to bottom), , upper Silty clay horizon (0.0-5.25m thickness) soft to firm for Yenagoa study areas, Medium silty clay horizon (0.75 to 1.5m thickness) soft to firm Yenagoa study areas, low clayey sand horizon (0.75 to 1.5m thickness) soft Yenagoa study areas, peaty clay (1.0m thickness between 3.0-4.0m) soft Igbogene Yenagoa, upper sand horizon (3.0m thickness) silty sand Etegwe town Yenagoa, lower sand horizon (13.5 to 18.0m) silty sand to fine to medium and medium coarse appear in all the boreholes in Yenagoa. Yenagoa sub-soil show clay of high plasticity, silt of intermediate to high plasticity (CH, MI and MH) according to unified soil classification system from the results it shows that pad foundation is more economical in the study areas. Raft foundation is more economical in the six towns study areas of Yenagoa with Allowable bearing capacity of the upper clay layer ranges from 23-128KN/m2 In view of the significant variations in the stratification and engineering geological index properties of the soil in the six towns in Yenagoa while geotechnical data of one location cannot be used as a basis for design of foundation in a nearby land. Axial load carrying capacity for 305, 306mm, 356, 360mm, 406mm, 600and 610mm diameter for bore pile and tubular driven steel cased piles respectively were calculated for all the studies areas. Where high rise building is required in the various study areas. The study shows that the frequent causes of building collapse in Yenagoa are as a result of inadequate geotechnical investigations of the subsoil, poor quality materials, and poor work supervision.","PeriodicalId":249043,"journal":{"name":"British Journal of Earth Sciences Research","volume":"44 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2023-04-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Geotechnical Considerations for Foundation Design in Parts of Yenagoa, Bayelsa State, Niger Delta Nigeria\",\"authors\":\"P.N John, G. J. Udom, A.C Tse\",\"doi\":\"10.37745/bjesr.2013/vol11n45062\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This research was to determine geotechnical properties of the subsoils in some part of Yenagoa and environs to obtain proper foundation design parameters, six towns in Yenagoa local government area, Bayelsa state was investigated. Six geotechnical boreholes was drilled and laboratory studies of soils samples were obtained from 0-20.25m deep. Subsurface soil profiles were delineated followed by determination of their index and mechanical properties, including Atterberg limits, particle sizes distribution, undrained shear strength, shear box test and consolidation coefficient. The general soil profile consists of (from top to bottom), , upper Silty clay horizon (0.0-5.25m thickness) soft to firm for Yenagoa study areas, Medium silty clay horizon (0.75 to 1.5m thickness) soft to firm Yenagoa study areas, low clayey sand horizon (0.75 to 1.5m thickness) soft Yenagoa study areas, peaty clay (1.0m thickness between 3.0-4.0m) soft Igbogene Yenagoa, upper sand horizon (3.0m thickness) silty sand Etegwe town Yenagoa, lower sand horizon (13.5 to 18.0m) silty sand to fine to medium and medium coarse appear in all the boreholes in Yenagoa. Yenagoa sub-soil show clay of high plasticity, silt of intermediate to high plasticity (CH, MI and MH) according to unified soil classification system from the results it shows that pad foundation is more economical in the study areas. Raft foundation is more economical in the six towns study areas of Yenagoa with Allowable bearing capacity of the upper clay layer ranges from 23-128KN/m2 In view of the significant variations in the stratification and engineering geological index properties of the soil in the six towns in Yenagoa while geotechnical data of one location cannot be used as a basis for design of foundation in a nearby land. Axial load carrying capacity for 305, 306mm, 356, 360mm, 406mm, 600and 610mm diameter for bore pile and tubular driven steel cased piles respectively were calculated for all the studies areas. Where high rise building is required in the various study areas. The study shows that the frequent causes of building collapse in Yenagoa are as a result of inadequate geotechnical investigations of the subsoil, poor quality materials, and poor work supervision.\",\"PeriodicalId\":249043,\"journal\":{\"name\":\"British Journal of Earth Sciences Research\",\"volume\":\"44 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-04-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"British Journal of Earth Sciences Research\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.37745/bjesr.2013/vol11n45062\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"British Journal of Earth Sciences Research","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.37745/bjesr.2013/vol11n45062","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

为了确定叶纳戈阿部分地区及周边地区地基的岩土力学特性,获得合理的地基设计参数,对巴耶尔萨州叶纳戈阿地方政府区域的6个城镇进行了调查。钻了6个岩土工程钻孔,并在0-20.25米深的土壤样品中进行了实验室研究。绘制地下土体剖面,测定其指标和力学性能,包括阿特贝格极限、粒径分布、不排水抗剪强度、剪切箱试验和固结系数。总体土壤剖面由(从上到下),叶纳戈阿研究区上粉质粘土层(厚度为0.0 ~ 5.25m)软至硬,叶纳戈阿研究区中粉质粘土层(厚度为0.75 ~ 1.5m)软至硬,叶纳戈阿研究区低粘土层(厚度为0.75 ~ 1.5m)软,叶纳戈阿研究区泥炭质粘土层(厚度为3.0 ~ 4.0m)软,叶纳戈阿埃特格韦镇粉质砂层(厚度为3.0m),叶纳戈阿。下砂层(13.5 ~ 18.0m)粉砂至细砂至中砂和中粗砂在叶纳戈阿所有钻孔中均有出现。根据统一的土壤分类体系,叶纳戈亚地下土表现为高塑性粘土、中高塑性粉砂(CH、MI和MH),表明垫层地基在研究区更为经济。筏板基础在叶纳戈阿6个城镇研究区较为经济,上部粘土层允许承载力在23-128KN/m2之间。鉴于叶纳戈阿6个城镇土壤的分层和工程地质指标性质存在显著差异,且一个地点的岩土资料不能作为附近土地基础设计的依据。计算了各研究区直径分别为305mm、306mm、356mm、360mm、406mm、600和610mm的钻孔桩和管入钢套管桩的轴向承载力。各个研究区域需要高层建筑的地方。研究表明,Yenagoa地区建筑倒塌的常见原因是对底土岩土工程调查不足、材料质量差和工程监督不力。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Geotechnical Considerations for Foundation Design in Parts of Yenagoa, Bayelsa State, Niger Delta Nigeria
This research was to determine geotechnical properties of the subsoils in some part of Yenagoa and environs to obtain proper foundation design parameters, six towns in Yenagoa local government area, Bayelsa state was investigated. Six geotechnical boreholes was drilled and laboratory studies of soils samples were obtained from 0-20.25m deep. Subsurface soil profiles were delineated followed by determination of their index and mechanical properties, including Atterberg limits, particle sizes distribution, undrained shear strength, shear box test and consolidation coefficient. The general soil profile consists of (from top to bottom), , upper Silty clay horizon (0.0-5.25m thickness) soft to firm for Yenagoa study areas, Medium silty clay horizon (0.75 to 1.5m thickness) soft to firm Yenagoa study areas, low clayey sand horizon (0.75 to 1.5m thickness) soft Yenagoa study areas, peaty clay (1.0m thickness between 3.0-4.0m) soft Igbogene Yenagoa, upper sand horizon (3.0m thickness) silty sand Etegwe town Yenagoa, lower sand horizon (13.5 to 18.0m) silty sand to fine to medium and medium coarse appear in all the boreholes in Yenagoa. Yenagoa sub-soil show clay of high plasticity, silt of intermediate to high plasticity (CH, MI and MH) according to unified soil classification system from the results it shows that pad foundation is more economical in the study areas. Raft foundation is more economical in the six towns study areas of Yenagoa with Allowable bearing capacity of the upper clay layer ranges from 23-128KN/m2 In view of the significant variations in the stratification and engineering geological index properties of the soil in the six towns in Yenagoa while geotechnical data of one location cannot be used as a basis for design of foundation in a nearby land. Axial load carrying capacity for 305, 306mm, 356, 360mm, 406mm, 600and 610mm diameter for bore pile and tubular driven steel cased piles respectively were calculated for all the studies areas. Where high rise building is required in the various study areas. The study shows that the frequent causes of building collapse in Yenagoa are as a result of inadequate geotechnical investigations of the subsoil, poor quality materials, and poor work supervision.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信