内置复位创建的93dB-ohm 2.5Gb/s CMOS突发模式光接收器

2008 IEEE International Symposium on VLSI Design, Automation and Test (VLSI-DAT) Pub Date : 2008-04-23 DOI:10.1109/VDAT.2008.4542436

Yiming Lin, Chia-Ming Tsai

{"title":"内置复位创建的93dB-ohm 2.5Gb/s CMOS突发模式光接收器","authors":"Yiming Lin, Chia-Ming Tsai","doi":"10.1109/VDAT.2008.4542436","DOIUrl":null,"url":null,"abstract":"This paper presents a 2.5 Gb/s burst-mode optical receiver with quick response in a 0.18 mum CMOS process. A dual-mode transimpedance amplifier is used to achieve a dynamic range of 19 dB. The internal reset signal created by the limiting amplifier is more reliable due to the increased net gain compared to prior designs. The receiver achieves 93 dBOmega total differential transimpedance gain, 1.56 GHz optical bandwidth, and fast response time of less than 10 ns. This IC dissipates 146 mW from a 1.8 V supply.","PeriodicalId":156790,"journal":{"name":"2008 IEEE International Symposium on VLSI Design, Automation and Test (VLSI-DAT)","volume":"34 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2008-04-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"A 93dB-ohm 2.5Gb/s CMOS burst-mode optical receiver with internal reset creation\",\"authors\":\"Yiming Lin, Chia-Ming Tsai\",\"doi\":\"10.1109/VDAT.2008.4542436\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents a 2.5 Gb/s burst-mode optical receiver with quick response in a 0.18 mum CMOS process. A dual-mode transimpedance amplifier is used to achieve a dynamic range of 19 dB. The internal reset signal created by the limiting amplifier is more reliable due to the increased net gain compared to prior designs. The receiver achieves 93 dBOmega total differential transimpedance gain, 1.56 GHz optical bandwidth, and fast response time of less than 10 ns. This IC dissipates 146 mW from a 1.8 V supply.\",\"PeriodicalId\":156790,\"journal\":{\"name\":\"2008 IEEE International Symposium on VLSI Design, Automation and Test (VLSI-DAT)\",\"volume\":\"34 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2008-04-23\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2008 IEEE International Symposium on VLSI Design, Automation and Test (VLSI-DAT)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/VDAT.2008.4542436\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2008 IEEE International Symposium on VLSI Design, Automation and Test (VLSI-DAT)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/VDAT.2008.4542436","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

本文提出了一种基于0.18 μ m CMOS工艺的快速响应2.5 Gb/s突发型光接收机。采用双模跨阻放大器实现19db的动态范围。由于与先前的设计相比，增加了净增益，因此由限制放大器产生的内部复位信号更加可靠。该接收机的总差分透阻增益为93 dbomω，光带宽为1.56 GHz，响应时间小于10 ns。该IC从1.8 V电源耗散146 mW。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

A 93dB-ohm 2.5Gb/s CMOS burst-mode optical receiver with internal reset creation

This paper presents a 2.5 Gb/s burst-mode optical receiver with quick response in a 0.18 mum CMOS process. A dual-mode transimpedance amplifier is used to achieve a dynamic range of 19 dB. The internal reset signal created by the limiting amplifier is more reliable due to the increased net gain compared to prior designs. The receiver achieves 93 dBOmega total differential transimpedance gain, 1.56 GHz optical bandwidth, and fast response time of less than 10 ns. This IC dissipates 146 mW from a 1.8 V supply.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2008 IEEE International Symposium on VLSI Design, Automation and Test (VLSI-DAT)

自引率

0.00%

发文量