一个> 89%效率的LED驱动器,0.5V供电电压,适用于要求低平均电流的应用

Wala Saadeh, Temesghen Tekeste, M. Perrott
{"title":"一个> 89%效率的LED驱动器,0.5V供电电压,适用于要求低平均电流的应用","authors":"Wala Saadeh, Temesghen Tekeste, M. Perrott","doi":"10.1109/ASSCC.2013.6691035","DOIUrl":null,"url":null,"abstract":"A modified boost converter topology is proposed to achieve better than 89% efficiency as an LED driver for applications in which low supply voltage and low average current are desired such as in a photoplethysmographic (PPG) heart rate (HR) monitor device. The approach embraces pulsing of the LED current, and allows a highly digital implementation for varying LED brightness based on Pulse Density Modulation (PDM). Measured results indicate that the LED driver, which is implemented in 180nm CMOS along with an external inductor, achieves an output current range of 28uA to 1.3mA with 6 current settings while maintaining >89% efficiency over a supply voltage range of 0.5 to 0.6V.","PeriodicalId":296544,"journal":{"name":"2013 IEEE Asian Solid-State Circuits Conference (A-SSCC)","volume":"10 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2013-12-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"16","resultStr":"{\"title\":\"A > 89% efficient LED driver with 0.5V supply voltage for applications requiring low average current\",\"authors\":\"Wala Saadeh, Temesghen Tekeste, M. Perrott\",\"doi\":\"10.1109/ASSCC.2013.6691035\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A modified boost converter topology is proposed to achieve better than 89% efficiency as an LED driver for applications in which low supply voltage and low average current are desired such as in a photoplethysmographic (PPG) heart rate (HR) monitor device. The approach embraces pulsing of the LED current, and allows a highly digital implementation for varying LED brightness based on Pulse Density Modulation (PDM). Measured results indicate that the LED driver, which is implemented in 180nm CMOS along with an external inductor, achieves an output current range of 28uA to 1.3mA with 6 current settings while maintaining >89% efficiency over a supply voltage range of 0.5 to 0.6V.\",\"PeriodicalId\":296544,\"journal\":{\"name\":\"2013 IEEE Asian Solid-State Circuits Conference (A-SSCC)\",\"volume\":\"10 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2013-12-23\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"16\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2013 IEEE Asian Solid-State Circuits Conference (A-SSCC)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ASSCC.2013.6691035\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2013 IEEE Asian Solid-State Circuits Conference (A-SSCC)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ASSCC.2013.6691035","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 16

摘要

提出了一种改进的升压转换器拓扑结构,以实现优于89%的效率,作为LED驱动器,用于需要低电源电压和低平均电流的应用,例如光电容积脉搏图(PPG)心率(HR)监测设备。该方法包含LED电流的脉冲,并允许基于脉冲密度调制(PDM)的高度数字化实现不同的LED亮度。测量结果表明,采用180nm CMOS和外部电感实现的LED驱动器在6个电流设置下实现28uA至1.3mA的输出电流范围,同时在0.5至0.6V的电源电压范围内保持>89%的效率。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
A > 89% efficient LED driver with 0.5V supply voltage for applications requiring low average current
A modified boost converter topology is proposed to achieve better than 89% efficiency as an LED driver for applications in which low supply voltage and low average current are desired such as in a photoplethysmographic (PPG) heart rate (HR) monitor device. The approach embraces pulsing of the LED current, and allows a highly digital implementation for varying LED brightness based on Pulse Density Modulation (PDM). Measured results indicate that the LED driver, which is implemented in 180nm CMOS along with an external inductor, achieves an output current range of 28uA to 1.3mA with 6 current settings while maintaining >89% efficiency over a supply voltage range of 0.5 to 0.6V.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信