{"title":"聚合物废弃物的粉碎再处理","authors":"P. Kulu, D. Goljandin","doi":"10.5772/intechopen.99715","DOIUrl":null,"url":null,"abstract":"Global introduction of waste utilization techniques to the polymer market is currently not fully developed but has enormous potential. Before reintegration of used material into a new product, it normally requires grinding, that is shredding, crushing, or milling. In traditional grinders, the generated stresses in the material to be ground are equal to or less than the strength of the material. If by traditional methods, the stresses generated are compressive + shift, so by milling based on collision are tension + shift. Due to the high stress-material strength ratio at collision, it is possible to crush not only brittle materials but also ductile materials. This process allows easily combining the grinding of composite materials with their separation into individual constituents. In the current study, the mechanical recycling of the following groups of polymer materials was studied: pure brittle and soft polymers (PMMA, HDPE and IER), blends of plastics (ABS+PMMA, PC + ABS), reinforced plastics (PMMA+GFP); elastomers (rubber and tyres), and printed circuit boards (PCB).","PeriodicalId":107142,"journal":{"name":"Current Topics in Recycling [Working Title]","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2021-09-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Retreatment of Polymer Wastes by Disintegrator Milling\",\"authors\":\"P. Kulu, D. Goljandin\",\"doi\":\"10.5772/intechopen.99715\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Global introduction of waste utilization techniques to the polymer market is currently not fully developed but has enormous potential. Before reintegration of used material into a new product, it normally requires grinding, that is shredding, crushing, or milling. In traditional grinders, the generated stresses in the material to be ground are equal to or less than the strength of the material. If by traditional methods, the stresses generated are compressive + shift, so by milling based on collision are tension + shift. Due to the high stress-material strength ratio at collision, it is possible to crush not only brittle materials but also ductile materials. This process allows easily combining the grinding of composite materials with their separation into individual constituents. In the current study, the mechanical recycling of the following groups of polymer materials was studied: pure brittle and soft polymers (PMMA, HDPE and IER), blends of plastics (ABS+PMMA, PC + ABS), reinforced plastics (PMMA+GFP); elastomers (rubber and tyres), and printed circuit boards (PCB).\",\"PeriodicalId\":107142,\"journal\":{\"name\":\"Current Topics in Recycling [Working Title]\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-09-21\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Current Topics in Recycling [Working Title]\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.5772/intechopen.99715\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Current Topics in Recycling [Working Title]","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.5772/intechopen.99715","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Retreatment of Polymer Wastes by Disintegrator Milling
Global introduction of waste utilization techniques to the polymer market is currently not fully developed but has enormous potential. Before reintegration of used material into a new product, it normally requires grinding, that is shredding, crushing, or milling. In traditional grinders, the generated stresses in the material to be ground are equal to or less than the strength of the material. If by traditional methods, the stresses generated are compressive + shift, so by milling based on collision are tension + shift. Due to the high stress-material strength ratio at collision, it is possible to crush not only brittle materials but also ductile materials. This process allows easily combining the grinding of composite materials with their separation into individual constituents. In the current study, the mechanical recycling of the following groups of polymer materials was studied: pure brittle and soft polymers (PMMA, HDPE and IER), blends of plastics (ABS+PMMA, PC + ABS), reinforced plastics (PMMA+GFP); elastomers (rubber and tyres), and printed circuit boards (PCB).