双频rfid阅读器天线采用环形板与弯曲和矩形槽

C. Phongcharoenpanich, R. Suwalak
{"title":"双频rfid阅读器天线采用环形板与弯曲和矩形槽","authors":"C. Phongcharoenpanich, R. Suwalak","doi":"10.1109/ICEAA.2010.5651264","DOIUrl":null,"url":null,"abstract":"A dual-band antenna for the reader of the Radio Frequency Identification (RFID) applications is proposed. The antenna design to achieve the dual-frequency band is carried out by using the annular plate with curved and rectangular slots. The simulation is done by using CST based on the Finite Integral Method. Furthermore, the parameters of antenna are optimized with the Quasi Newton method. The effects of antenna parameters are analyzed. Along the UHF-RFID band, the pattern is unidirectional beam. The half-power beamwidths in xz- and yz- planes are 78 and 64 degrees, respectively. The bandwidth covers 911–925.6 MHz. The directivity is 8.33 dBi. For 2.45 GHz band, the pattern is also unidirectional beam. The half-power beamwidths in xz- and yz-planes are 58 and 21 degrees, respectively. The bandwidth covers 2.32–2.52 GHz. The gain is 9–10.5 dBi.","PeriodicalId":375707,"journal":{"name":"2010 International Conference on Electromagnetics in Advanced Applications","volume":"27 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2010-12-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"22","resultStr":"{\"title\":\"Dual-band RFID-reader antenna using annular plate with curved and rectangular slots\",\"authors\":\"C. Phongcharoenpanich, R. Suwalak\",\"doi\":\"10.1109/ICEAA.2010.5651264\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A dual-band antenna for the reader of the Radio Frequency Identification (RFID) applications is proposed. The antenna design to achieve the dual-frequency band is carried out by using the annular plate with curved and rectangular slots. The simulation is done by using CST based on the Finite Integral Method. Furthermore, the parameters of antenna are optimized with the Quasi Newton method. The effects of antenna parameters are analyzed. Along the UHF-RFID band, the pattern is unidirectional beam. The half-power beamwidths in xz- and yz- planes are 78 and 64 degrees, respectively. The bandwidth covers 911–925.6 MHz. The directivity is 8.33 dBi. For 2.45 GHz band, the pattern is also unidirectional beam. The half-power beamwidths in xz- and yz-planes are 58 and 21 degrees, respectively. The bandwidth covers 2.32–2.52 GHz. The gain is 9–10.5 dBi.\",\"PeriodicalId\":375707,\"journal\":{\"name\":\"2010 International Conference on Electromagnetics in Advanced Applications\",\"volume\":\"27 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2010-12-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"22\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2010 International Conference on Electromagnetics in Advanced Applications\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICEAA.2010.5651264\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2010 International Conference on Electromagnetics in Advanced Applications","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICEAA.2010.5651264","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 22

摘要

提出了一种用于射频识别(RFID)阅读器的双频天线。采用带弯槽和矩形槽的环形板进行双频带天线设计。采用基于有限积分法的CST进行了数值模拟。在此基础上,采用拟牛顿法对天线参数进行了优化。分析了天线参数的影响。在UHF-RFID波段上,图案为单向波束。半功率波束在xz面和yz面分别为78度和64度。带宽范围为911 ~ 925.6 MHz。指向性为8.33 dBi。在2.45 GHz频段,该模式也是单向波束。半功率波束在xz面和yz面分别为58度和21度。带宽范围为2.32 ~ 2.52 GHz。增益为9-10.5 dBi。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Dual-band RFID-reader antenna using annular plate with curved and rectangular slots
A dual-band antenna for the reader of the Radio Frequency Identification (RFID) applications is proposed. The antenna design to achieve the dual-frequency band is carried out by using the annular plate with curved and rectangular slots. The simulation is done by using CST based on the Finite Integral Method. Furthermore, the parameters of antenna are optimized with the Quasi Newton method. The effects of antenna parameters are analyzed. Along the UHF-RFID band, the pattern is unidirectional beam. The half-power beamwidths in xz- and yz- planes are 78 and 64 degrees, respectively. The bandwidth covers 911–925.6 MHz. The directivity is 8.33 dBi. For 2.45 GHz band, the pattern is also unidirectional beam. The half-power beamwidths in xz- and yz-planes are 58 and 21 degrees, respectively. The bandwidth covers 2.32–2.52 GHz. The gain is 9–10.5 dBi.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信