真空炉温度均匀性及工作区域尺寸优化研究

2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA) Pub Date : 2015-06-14 DOI:10.1109/ICICTA.2015.200

Xiu Haohua, Xu Tao, Tang Jian, Fan Lulu, Xu Tianshuang, Yoshino Tatsuo

{"title":"真空炉温度均匀性及工作区域尺寸优化研究","authors":"Xiu Haohua, Xu Tao, Tang Jian, Fan Lulu, Xu Tianshuang, Yoshino Tatsuo","doi":"10.1109/ICICTA.2015.200","DOIUrl":null,"url":null,"abstract":"According to the radiation heating technology, a simulation model of temperature field in vacuum furnace's heating chamber is established. To realize the control standards for the temperature uniformity in furnace, thermocouples were arranged according to the nine point method. Due to the complex structure in vacuum furnace, a numerical simulation software ANSYS was chosen for modeling and analysis. Finally, on the condition of keeping the fixed outer wall size and good temperature uniformity, this paper optimized the size of working zone and obtained the maximum.","PeriodicalId":231694,"journal":{"name":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2015-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"Research on the Temperature Uniformity of Vacuum Furnace and Size Optimization of Working Zone\",\"authors\":\"Xiu Haohua, Xu Tao, Tang Jian, Fan Lulu, Xu Tianshuang, Yoshino Tatsuo\",\"doi\":\"10.1109/ICICTA.2015.200\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"According to the radiation heating technology, a simulation model of temperature field in vacuum furnace's heating chamber is established. To realize the control standards for the temperature uniformity in furnace, thermocouples were arranged according to the nine point method. Due to the complex structure in vacuum furnace, a numerical simulation software ANSYS was chosen for modeling and analysis. Finally, on the condition of keeping the fixed outer wall size and good temperature uniformity, this paper optimized the size of working zone and obtained the maximum.\",\"PeriodicalId\":231694,\"journal\":{\"name\":\"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)\",\"volume\":\"1 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2015-06-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICICTA.2015.200\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICICTA.2015.200","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 3

摘要

根据辐射加热技术，建立了真空炉加热室温度场的仿真模型。为实现炉膛温度均匀性控制标准，采用九点法布置热电偶。针对真空炉结构复杂的特点，采用数值模拟软件ANSYS对其进行建模和分析。最后，在保持固定的外墙尺寸和良好的温度均匀性的条件下，对工作区域的尺寸进行了优化，得到了最大值。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Research on the Temperature Uniformity of Vacuum Furnace and Size Optimization of Working Zone

According to the radiation heating technology, a simulation model of temperature field in vacuum furnace's heating chamber is established. To realize the control standards for the temperature uniformity in furnace, thermocouples were arranged according to the nine point method. Due to the complex structure in vacuum furnace, a numerical simulation software ANSYS was chosen for modeling and analysis. Finally, on the condition of keeping the fixed outer wall size and good temperature uniformity, this paper optimized the size of working zone and obtained the maximum.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2015 8th International Conference on Intelligent Computation Technology and Automation (ICICTA)

自引率

0.00%

发文量