基于阀电压和阀电流的直流换向故障判别方法

Z. Fan, L. Zhu, X. Wei, D. Liu
{"title":"基于阀电压和阀电流的直流换向故障判别方法","authors":"Z. Fan, L. Zhu, X. Wei, D. Liu","doi":"10.1049/icp.2021.2559","DOIUrl":null,"url":null,"abstract":"Commutation failure is one of the most common faults on the inverter side of HVDC transmission system. Rapid and accurate discrimination of commutation failure is the premise of resisting commutation failure. In this paper, a method for discriminating HVDC commutation failure based on valve voltage and valve current is proposed. According to the process and development of commutation failure, combined with the two waveform information of valve voltage and valve current, the most direct information characteristics of commutation failure are extracted for discrimination. Compared with the discrimination method of single use of converter valve voltage or converter valve current, this method not only accurately discriminates the commutation failure, but also improves the discrimination speed and shortens the discrimination time. Taking CIGRE HVDC benchmark model as simulation example, the logic module of HVDC commutation failure discrimination method based on valve voltage and valve current is built in PSCAD/EMTDC to verify the effectiveness of the proposed method.","PeriodicalId":242596,"journal":{"name":"2021 Annual Meeting of CSEE Study Committee of HVDC and Power Electronics (HVDC 2021)","volume":"5 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Discrimination method of HVDC commutation failure based on valve voltage and valve current\",\"authors\":\"Z. Fan, L. Zhu, X. Wei, D. Liu\",\"doi\":\"10.1049/icp.2021.2559\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Commutation failure is one of the most common faults on the inverter side of HVDC transmission system. Rapid and accurate discrimination of commutation failure is the premise of resisting commutation failure. In this paper, a method for discriminating HVDC commutation failure based on valve voltage and valve current is proposed. According to the process and development of commutation failure, combined with the two waveform information of valve voltage and valve current, the most direct information characteristics of commutation failure are extracted for discrimination. Compared with the discrimination method of single use of converter valve voltage or converter valve current, this method not only accurately discriminates the commutation failure, but also improves the discrimination speed and shortens the discrimination time. Taking CIGRE HVDC benchmark model as simulation example, the logic module of HVDC commutation failure discrimination method based on valve voltage and valve current is built in PSCAD/EMTDC to verify the effectiveness of the proposed method.\",\"PeriodicalId\":242596,\"journal\":{\"name\":\"2021 Annual Meeting of CSEE Study Committee of HVDC and Power Electronics (HVDC 2021)\",\"volume\":\"5 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1900-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2021 Annual Meeting of CSEE Study Committee of HVDC and Power Electronics (HVDC 2021)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1049/icp.2021.2559\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2021 Annual Meeting of CSEE Study Committee of HVDC and Power Electronics (HVDC 2021)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1049/icp.2021.2559","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

换相故障是高压直流输电系统逆变侧最常见的故障之一。快速准确地判别换相失效是防止换相失效的前提。本文提出了一种基于阀电压和阀电流判别高压直流换向故障的方法。根据换向故障的过程和发展,结合阀电压和阀电流两种波形信息,提取换向故障最直接的信息特征进行判别。与单一使用换流阀电压或换流阀电流的判别方法相比,该方法不仅能准确判别换流故障,而且提高了判别速度,缩短了判别时间。以CIGRE HVDC基准模型为仿真实例,在PSCAD/EMTDC中构建了基于阀电压和阀电流的HVDC换相故障判别方法的逻辑模块,验证了所提出方法的有效性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Discrimination method of HVDC commutation failure based on valve voltage and valve current
Commutation failure is one of the most common faults on the inverter side of HVDC transmission system. Rapid and accurate discrimination of commutation failure is the premise of resisting commutation failure. In this paper, a method for discriminating HVDC commutation failure based on valve voltage and valve current is proposed. According to the process and development of commutation failure, combined with the two waveform information of valve voltage and valve current, the most direct information characteristics of commutation failure are extracted for discrimination. Compared with the discrimination method of single use of converter valve voltage or converter valve current, this method not only accurately discriminates the commutation failure, but also improves the discrimination speed and shortens the discrimination time. Taking CIGRE HVDC benchmark model as simulation example, the logic module of HVDC commutation failure discrimination method based on valve voltage and valve current is built in PSCAD/EMTDC to verify the effectiveness of the proposed method.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信