Suitability and Utilization Study on Waste Plastic Brick as Alternative Construction Material

Construction industry is gradually increasing through the whole of the world and it is consuming natural resource raw materials for construction materials. Traditional way of producing clay brick without giving care for natural resource brought deficiency of natural resource. Now the days, plastics waste is the big challenge of the world on Environmental impacts and Alternative using High-Density Polyethylene (HDPE) plastic waste Brick for construction material is preventing environmental impact of plastic and in other hand saving natural resources clay soil. High-Density Polyethylene (HDPE) plastic waste was collected from different sites it was thrown and before producing waste plastic Brick High-Density Polyethylene (HDPE) is cleaned, and the size is minimized as it was suitable for plastic waste Brick. After that Plastic waste Bricks were produced for different Tests. five sample of plastic waste Bricks were produced for compressive strength test. Mean Compressive strength of Plastic waste Brick was 24MPa which is satisfied as per Ethiopian and ASTM standard Class A and SW grade respectively and for dimensional tolerance test, ten waste plastic Brick were taken to check dimensional change. Waste plastic Brick checked for dimensional tolerance were the same with the standard dimension as per ASTM standard. Plastic Waste Brick is not recommended for kitchen, chimney and like walling Purpose due to it has low fire resistant and melted at low temperature.