电解悬浮液电沉积复合涂层耐磨性评价

E. Ageeva, V. Serebrovsky, O.S. Sernikova
{"title":"电解悬浮液电沉积复合涂层耐磨性评价","authors":"E. Ageeva, V. Serebrovsky, O.S. Sernikova","doi":"10.36652/1813-1336-2023-19-2-73-76","DOIUrl":null,"url":null,"abstract":"The results of experimental studies aimed at assessing the wear resistance of composite coatings obtained by electrodeposition of electrolytes-suspensions with the addition of electroerosive powders made from waste high-speed steel grade P6M5 are presented. It has been experimentally established that the surface roughness parameter Ra of the obtained coatings is 2.14 microns, while the coefficient of friction on the path of 500 m is 0.14. It is noted that the introduction of highly solid particles of the electroerosive charge formed during the quenching of metal vapors in the working fluid during dispersion into the electrolyte increases the wear resistance of composite electrodeposited coatings.","PeriodicalId":178558,"journal":{"name":"Strengthening Technologies and Coatings","volume":"2 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Evaluation of wear resistance of composite coatings obtained by electrodeposition of electrolytes-suspensions\",\"authors\":\"E. Ageeva, V. Serebrovsky, O.S. Sernikova\",\"doi\":\"10.36652/1813-1336-2023-19-2-73-76\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The results of experimental studies aimed at assessing the wear resistance of composite coatings obtained by electrodeposition of electrolytes-suspensions with the addition of electroerosive powders made from waste high-speed steel grade P6M5 are presented. It has been experimentally established that the surface roughness parameter Ra of the obtained coatings is 2.14 microns, while the coefficient of friction on the path of 500 m is 0.14. It is noted that the introduction of highly solid particles of the electroerosive charge formed during the quenching of metal vapors in the working fluid during dispersion into the electrolyte increases the wear resistance of composite electrodeposited coatings.\",\"PeriodicalId\":178558,\"journal\":{\"name\":\"Strengthening Technologies and Coatings\",\"volume\":\"2 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1900-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Strengthening Technologies and Coatings\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.36652/1813-1336-2023-19-2-73-76\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Strengthening Technologies and Coatings","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.36652/1813-1336-2023-19-2-73-76","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

本文介绍了在废高速钢P6M5中加入电蚀粉末,电沉积电解质悬浮液制备复合涂层的耐磨性实验研究结果。实验结果表明,所得涂层的表面粗糙度参数Ra为2.14微米,500 m路径上的摩擦系数为0.14。值得注意的是,在分散过程中工作流体中的金属蒸气淬火过程中形成的电侵蚀电荷的高固体颗粒引入电解液增加了复合电沉积涂层的耐磨性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Evaluation of wear resistance of composite coatings obtained by electrodeposition of electrolytes-suspensions
The results of experimental studies aimed at assessing the wear resistance of composite coatings obtained by electrodeposition of electrolytes-suspensions with the addition of electroerosive powders made from waste high-speed steel grade P6M5 are presented. It has been experimentally established that the surface roughness parameter Ra of the obtained coatings is 2.14 microns, while the coefficient of friction on the path of 500 m is 0.14. It is noted that the introduction of highly solid particles of the electroerosive charge formed during the quenching of metal vapors in the working fluid during dispersion into the electrolyte increases the wear resistance of composite electrodeposited coatings.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信