Ring-oscillator-based timing generator for ultralow-power applications

Many integrated circuit functional blocks, such as data and power converters, require timing and control signals consisting of complex sequences of pulses. Traditionally, these signals are generated from a clock signal using a combination of flip-flops, latches and delay elements. Due to the large internal switching activity of flips-flops and due to the many, effectively unused, clock cycles, this solution is inefficient from a power consumption point of view and is, therefore, unsuitable for ultralow-power applications. In this paper we present a method to generate non-overlapping control signals without using flip-flops or a clock. We propose to decode and translate the internal states of a ring oscillator into the desired control signal sequence. We show how this can be achieved using a simple combinatorial logic decoder. The proposed architecture significantly reduces the switching activity and the capacitive load, largely reducing the consumed power. We show an example implementation of a 9-bit SAR logic utilizing our proposed method. Furthermore, we show simulation results and compare the power consumption of the example SAR implementation to that of a functionally identical flip-flop-based state-of-the-art ultralow-power SAR. We were able to achieve a 5.8x reduction in consumed power for the complete SAR and 8x for the one-hot generation sub-part.