Transient Process at Atmospheric Discharge into the Landline and the Appearance of an Electric Arc in the Switch

This document proposes a model of the process of atmospheric discharge of overhead lines followed by an electric arc. The intensity of atmospheric discharges, followed by electric arc and destruction, is determined by the difference in potential and current. Such a structure and form of discharge make it difficult to analyze the transient process and obtain adequate solutions. That is why the model of the transient process in the electric arc of the switch under the conditions of interruption of the AC circuit is specially analyzed. Simple equivalent schemes for the analysis of phenomena with given values of linear parameters are presented, which are very simple to apply. All influential parameters by which the overvoltage values in the model can be estimated were also taken into account. The evaluation of the proposed model was performed using the adapted MATLAB program psbsurlightcuurent for atmospheric electrical discharge, which contains a high frequency current source. The verified simulation method was used to verify the results as part of a method derived from artificial intelligence algorithms. The process simulation program, the obtained voltage and current diagrams confirm the application of the simulation algorithm model.