弯曲差动传输线采用短路耦合线进行共模噪声抑制

2011 IEEE 20th Conference on Electrical Performance of Electronic Packaging and Systems Pub Date : 2011-12-12 DOI:10.1109/EPEPS.2011.6100249

Chia-Han Chang, R. Fang, Chun-Long Wang

{"title":"弯曲差动传输线采用短路耦合线进行共模噪声抑制","authors":"Chia-Han Chang, R. Fang, Chun-Long Wang","doi":"10.1109/EPEPS.2011.6100249","DOIUrl":null,"url":null,"abstract":"In this paper, a bended differential transmission line using a short-circuited coupled line is proposed to efficiently suppress the common-mode noise. It has been shown that the bended differential transmission line using the short-circuited coupled line can greatly reduce the mode conversion from −5.47 dB to −14.75 dB and the TDT common-mode noise from 0.068 V to 0.02 V as compared with the bended differential transmission line using the right-angle bend. In order to verify the simulation results, measurement is done in the frequency and time domains where the measurement results are in good agreement with the simulation results.","PeriodicalId":313560,"journal":{"name":"2011 IEEE 20th Conference on Electrical Performance of Electronic Packaging and Systems","volume":"69 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2011-12-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Bended differential transmission line using short-circuited coupled line for common-mode noise suppression\",\"authors\":\"Chia-Han Chang, R. Fang, Chun-Long Wang\",\"doi\":\"10.1109/EPEPS.2011.6100249\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, a bended differential transmission line using a short-circuited coupled line is proposed to efficiently suppress the common-mode noise. It has been shown that the bended differential transmission line using the short-circuited coupled line can greatly reduce the mode conversion from −5.47 dB to −14.75 dB and the TDT common-mode noise from 0.068 V to 0.02 V as compared with the bended differential transmission line using the right-angle bend. In order to verify the simulation results, measurement is done in the frequency and time domains where the measurement results are in good agreement with the simulation results.\",\"PeriodicalId\":313560,\"journal\":{\"name\":\"2011 IEEE 20th Conference on Electrical Performance of Electronic Packaging and Systems\",\"volume\":\"69 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2011-12-12\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2011 IEEE 20th Conference on Electrical Performance of Electronic Packaging and Systems\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/EPEPS.2011.6100249\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2011 IEEE 20th Conference on Electrical Performance of Electronic Packaging and Systems","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/EPEPS.2011.6100249","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

为了有效地抑制共模噪声，本文提出了一种采用短路耦合线的弯曲差动传输线。结果表明，与采用直角弯曲的差分传输线相比，采用短路耦合线的弯曲差分传输线可以将模式转换从−5.47 dB降低到−14.75 dB，将TDT共模噪声从0.068 V降低到0.02 V。为了验证仿真结果，在测量结果与仿真结果吻合较好的频域和时域进行了测量。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Bended differential transmission line using short-circuited coupled line for common-mode noise suppression

In this paper, a bended differential transmission line using a short-circuited coupled line is proposed to efficiently suppress the common-mode noise. It has been shown that the bended differential transmission line using the short-circuited coupled line can greatly reduce the mode conversion from −5.47 dB to −14.75 dB and the TDT common-mode noise from 0.068 V to 0.02 V as compared with the bended differential transmission line using the right-angle bend. In order to verify the simulation results, measurement is done in the frequency and time domains where the measurement results are in good agreement with the simulation results.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2011 IEEE 20th Conference on Electrical Performance of Electronic Packaging and Systems

自引率

0.00%

发文量