Stephanie Bou Malhab, Richard Karam, Fouad Kaddah, Tony El Khoury, Nabil Ghosn, Elie Khoury, Adib Kassis, Joseph Ghoubril
{"title":"利用非线性有限元分析对连续和分段牙弓技术牵引腭侧撞击性犬齿进行三维比较。","authors":"Stephanie Bou Malhab, Richard Karam, Fouad Kaddah, Tony El Khoury, Nabil Ghosn, Elie Khoury, Adib Kassis, Joseph Ghoubril","doi":"10.1177/14653125231187422","DOIUrl":null,"url":null,"abstract":"<p><strong>Objective: </strong>To compare the three-dimensional (3D) effects of canine traction on the maxillary teeth when using two different traction methods, the continuous and the segmented arch wire techniques; then to test whether adding a transpalatal arch (TPA) would affect their response to traction.</p><p><strong>Design: </strong>Finite element analysis.</p><p><strong>Methods: </strong>A cone-beam computed tomography (CBCT) scan of a patient with bilateral palatally impacted canines was chosen, from which a 3D model was derived and imported into ABAQUS. Two arch wires were modelled, a continuous round one and a segmented rectangular one. Four models were obtained by adding a TPA to both techniques. A 100° imposed rotation was then applied at the intersection between the vertical loop and the horizontal segment of each wire. Initial displacement of the maxillary tooth in the labio-lingual and in the vertical directions was measured. The absolute maximum principal stress of the periodontal ligament (PDL) was also assessed.</p><p><strong>Results: </strong>Traction using a continuous arch wire led to different movement patterns of all teeth, some of them were tipped in a labial direction while others were lingually tipped. Traction using a segmented arch wire resulted in a retroclination of the posterior teeth and a proclination of the anterior teeth with a high level of stress on the premolars' PDL. Adding the TPA only affected the displacement of the first molars. The right side showed a maximum displacement of the first premolar, while the left side showed it on the lateral. The total displacement on the right side was higher than the left side.</p><p><strong>Conclusion: </strong>The segmented technique caused a uniform displacement of all teeth while the continuous one showed a non-uniform displacement. The angulation and position of the vertical loop affected the displacement of the maxillary teeth. The addition of a TPA acted only on the first molars.</p>","PeriodicalId":16677,"journal":{"name":"Journal of Orthodontics","volume":" ","pages":"192-201"},"PeriodicalIF":1.4000,"publicationDate":"2024-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Three-dimensional comparison of continuous and segmented arch techniques in the traction of palatally impacted canines using a non-linear finite element analysis.\",\"authors\":\"Stephanie Bou Malhab, Richard Karam, Fouad Kaddah, Tony El Khoury, Nabil Ghosn, Elie Khoury, Adib Kassis, Joseph Ghoubril\",\"doi\":\"10.1177/14653125231187422\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><strong>Objective: </strong>To compare the three-dimensional (3D) effects of canine traction on the maxillary teeth when using two different traction methods, the continuous and the segmented arch wire techniques; then to test whether adding a transpalatal arch (TPA) would affect their response to traction.</p><p><strong>Design: </strong>Finite element analysis.</p><p><strong>Methods: </strong>A cone-beam computed tomography (CBCT) scan of a patient with bilateral palatally impacted canines was chosen, from which a 3D model was derived and imported into ABAQUS. Two arch wires were modelled, a continuous round one and a segmented rectangular one. Four models were obtained by adding a TPA to both techniques. A 100° imposed rotation was then applied at the intersection between the vertical loop and the horizontal segment of each wire. Initial displacement of the maxillary tooth in the labio-lingual and in the vertical directions was measured. The absolute maximum principal stress of the periodontal ligament (PDL) was also assessed.</p><p><strong>Results: </strong>Traction using a continuous arch wire led to different movement patterns of all teeth, some of them were tipped in a labial direction while others were lingually tipped. Traction using a segmented arch wire resulted in a retroclination of the posterior teeth and a proclination of the anterior teeth with a high level of stress on the premolars' PDL. Adding the TPA only affected the displacement of the first molars. The right side showed a maximum displacement of the first premolar, while the left side showed it on the lateral. The total displacement on the right side was higher than the left side.</p><p><strong>Conclusion: </strong>The segmented technique caused a uniform displacement of all teeth while the continuous one showed a non-uniform displacement. The angulation and position of the vertical loop affected the displacement of the maxillary teeth. The addition of a TPA acted only on the first molars.</p>\",\"PeriodicalId\":16677,\"journal\":{\"name\":\"Journal of Orthodontics\",\"volume\":\" \",\"pages\":\"192-201\"},\"PeriodicalIF\":1.4000,\"publicationDate\":\"2024-06-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Orthodontics\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1177/14653125231187422\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"2023/7/20 0:00:00\",\"PubModel\":\"Epub\",\"JCR\":\"Q3\",\"JCRName\":\"DENTISTRY, ORAL SURGERY & MEDICINE\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Orthodontics","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1177/14653125231187422","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2023/7/20 0:00:00","PubModel":"Epub","JCR":"Q3","JCRName":"DENTISTRY, ORAL SURGERY & MEDICINE","Score":null,"Total":0}
Three-dimensional comparison of continuous and segmented arch techniques in the traction of palatally impacted canines using a non-linear finite element analysis.
Objective: To compare the three-dimensional (3D) effects of canine traction on the maxillary teeth when using two different traction methods, the continuous and the segmented arch wire techniques; then to test whether adding a transpalatal arch (TPA) would affect their response to traction.
Design: Finite element analysis.
Methods: A cone-beam computed tomography (CBCT) scan of a patient with bilateral palatally impacted canines was chosen, from which a 3D model was derived and imported into ABAQUS. Two arch wires were modelled, a continuous round one and a segmented rectangular one. Four models were obtained by adding a TPA to both techniques. A 100° imposed rotation was then applied at the intersection between the vertical loop and the horizontal segment of each wire. Initial displacement of the maxillary tooth in the labio-lingual and in the vertical directions was measured. The absolute maximum principal stress of the periodontal ligament (PDL) was also assessed.
Results: Traction using a continuous arch wire led to different movement patterns of all teeth, some of them were tipped in a labial direction while others were lingually tipped. Traction using a segmented arch wire resulted in a retroclination of the posterior teeth and a proclination of the anterior teeth with a high level of stress on the premolars' PDL. Adding the TPA only affected the displacement of the first molars. The right side showed a maximum displacement of the first premolar, while the left side showed it on the lateral. The total displacement on the right side was higher than the left side.
Conclusion: The segmented technique caused a uniform displacement of all teeth while the continuous one showed a non-uniform displacement. The angulation and position of the vertical loop affected the displacement of the maxillary teeth. The addition of a TPA acted only on the first molars.
期刊介绍：
The Journal of Orthodontics has an international circulation, publishing papers from throughout the world. The official journal of the British Orthodontic Society, it aims to publish high quality, evidence-based, clinically orientated or clinically relevant original research papers that will underpin evidence based orthodontic care. It particularly welcomes reports on prospective research into different treatment methods and techniques but also systematic reviews, meta-analyses and studies which will stimulate interest in new developments. Regular features include original papers on clinically relevant topics, clinical case reports, reviews of the orthodontic literature, editorials, book reviews, correspondence and other features of interest to the orthodontic community. The Journal is published in full colour throughout.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
