Electrician : Jurnal Rekayasa dan Teknologi Elektro最新文献

Perbandingan Performansi Antara Differential Evolution dan Bat Algorithm pada Tuning PID Untuk Optimasi Kontrol Kecepatan Paralell Hybrid Electric Vehicle 差分进化算法和蝙蝠算法在并联混合动力电动汽车速度控制优化的 PID 调节上的性能比较

Electrician : Jurnal Rekayasa dan Teknologi Elektro Pub Date : 2024-01-31 DOI: 10.23960/elc.v18n1.2547

Simson Simson

引用次数: 0

Analisa Mesin Pengering Makanan Food Dehidrator Menggunakan Sensor Thermostat Berbasis Hybrid 使用基于混合型恒温器传感器的食品脱水器食品干燥机分析

Electrician : Jurnal Rekayasa dan Teknologi Elektro Pub Date : 2024-01-31 DOI: 10.23960/elc.v18n1.2582

Satria Pinandita, Supari Supari, Dian Nova Saputra, Anggara Fuad Al Amin

{"title":"Analisa Mesin Pengering Makanan Food Dehidrator Menggunakan Sensor Thermostat Berbasis Hybrid","authors":"Satria Pinandita, Supari Supari, Dian Nova Saputra, Anggara Fuad Al Amin","doi":"10.23960/elc.v18n1.2582","DOIUrl":"https://doi.org/10.23960/elc.v18n1.2582","url":null,"abstract":"The process of drying food is done in the traditional way, by drying it in the hot sun, but the traditional drying method makes the food unhygienic. Several factors can influence the drying results of food ingredients, including temperature and drying time. Using optimal drying temperatures and times can reduce the level of damage caused by the drying process. This research aims to obtain an analysis of a food dehydrator drying machine using a hybrid-based thermostat sensor that can optimally condition the temperature and time factors in the drying process, the hyfood dehydrator machine system uses a dehumidification method, there is a heat recovery mechanism that recycles heat to open new air, thus saving 60-70% of fresh air preheating energy consumption. Hot air moving in the room dries the material. It is known that the test result data was analyzed by calculating the accuracy values, down to the relative distance values. The results of the comparison process are used as validation of the output values produced by the temperature measuring instrument. The measurement results of the Digital Thermostat Sensor are in accordance with the datasheet and have a high level of accuracy. So the Digital Thermostat Sensor measuring instrument can be used as a measurement tool. With an internal fan, thermostat, and time settings on this device, you only need to set the right heat according to the type of food you want to dry. The shelves in the cupboard consist of drying trays that can maximize the drying process","PeriodicalId":193722,"journal":{"name":"Electrician : Jurnal Rekayasa dan Teknologi Elektro","volume":"30 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140478231","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Analisis Kelayakan Ekonomi dan Self-Consumption dari PLTS On-grid dan Hibrid Kapasitas 1328 kWp 1328 kWp 并网和混合型太阳能发电厂的经济可行性分析和自耗情况

Electrician : Jurnal Rekayasa dan Teknologi Elektro Pub Date : 2024-01-31 DOI: 10.23960/elc.v18n1.2617

Osea Zebua, Nugraha Wijayawardhana, Z. Huda

{"title":"Analisis Kelayakan Ekonomi dan Self-Consumption dari PLTS On-grid dan Hibrid Kapasitas 1328 kWp","authors":"Osea Zebua, Nugraha Wijayawardhana, Z. Huda","doi":"10.23960/elc.v18n1.2617","DOIUrl":"https://doi.org/10.23960/elc.v18n1.2617","url":null,"abstract":"Abstract — Solar energy is an alternative energy source to meet electrical energy needs. In Indonesia, rooftop solar power plants (PLTS) are widely used to meet people's electrical energy needs. However, the government's policy of limiting the use of solar energy from rooftop PLTS to serve electricity loads in the industrial sector and not allowing energy exports to the public electricity network (grid) means that households and producers providing electrical energy (prosumers) must maximize their own consumption (self-consumption) from solar energy and consider the economic feasibility of installing rooftop solar power plants. This paper aims to analyse the economic feasibility and independent consumption of on-grid and hybrid type rooftop PLTS both with 15% load and with actual load. The case study used is a PLTS with a capacity of 1,328.29 kWp with electricity load and solar panel production for two months used as a pattern for electricity load and solar panel production for a year. Economic feasibility is analysed by calculating economic feasibility parameters for the two types of rooftop PLTS, including net present value (NPV), internal rate return (IRR), profitable index (PI) and payback period (PBP). The simulation is carried out by programming using the Python programming language. The simulation results show that the level of self-consumption is greater when the electricity load served is greater and also when using batteries (hybrid PLTS). The greater the self-consumption value, the greater the economic feasibility of the rooftop PLTS to be built. Overall, on-grid rooftop solar PV is more economically feasible to install. \u0000Keywords — On-grid, hybrid, economic feasibility, self-consumption, rooftop solar power plant.","PeriodicalId":193722,"journal":{"name":"Electrician : Jurnal Rekayasa dan Teknologi Elektro","volume":"333 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140473217","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Rancang Bangun Smart Trash Bin Automation pada Smartlab Politeknik Negeri Jakarta 在雅加达 Politeknik Negeri 的 Smartlab 设计智能垃圾桶自动化系统

Electrician : Jurnal Rekayasa dan Teknologi Elektro Pub Date : 2024-01-31 DOI: 10.23960/elc.v18n1.2561

Muhamad Irfan Alhady, Bima Yudha Raharja, Rifqi Fuadi Hasani

{"title":"Rancang Bangun Smart Trash Bin Automation pada Smartlab Politeknik Negeri Jakarta","authors":"Muhamad Irfan Alhady, Bima Yudha Raharja, Rifqi Fuadi Hasani","doi":"10.23960/elc.v18n1.2561","DOIUrl":"https://doi.org/10.23960/elc.v18n1.2561","url":null,"abstract":"Smartlab is a new laboratory in Department of Electrical Engineering, Jakarta State Polytechnic. The lab is designed to support the latest research in the telecommunications field, including the implementation of automation for the systems and items in the lab. The development of a Smart Trash Bin Automation is one of the ongoing projects. Using information and digital technology, it aids in the management and handling of waste collection. This research has created the Smart Trash Bin Automation system, which is connected to the internet using Arduino Uno Rev3 and ESP-32. This module is responsible for processing and sending data from the trash bins to a smartphone. The smartphone use Blynk application, which receives data when the systems sends notification to the users when the trash bin reaches its maximum capacity. Smart Trash Bin Automation is also equipped with an ultrasonic sensor that detects objects inside the trash bin. If an object is detected, the trash bin will open automatically, eliminating the need for users to touch the trash bin directly. The system has been tested successfully, with all devices functioting as intended. \u0000Keywords—Arduino, ESP-32, Smartlab, Smart Trash Bin Automation, Ultrasonic sensor.","PeriodicalId":193722,"journal":{"name":"Electrician : Jurnal Rekayasa dan Teknologi Elektro","volume":"737 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140476529","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Pengaruh Panjang Jaringan Terhadap Drop Tegangan Pada Penyulang Duku dan Kurma PT. PLN (Persero) ULP Rumbia 网络长度对 PT PLN (Persero) ULP Rumbia 的 Duku 和 Kurma 储藏库电压降的影响

Electrician : Jurnal Rekayasa dan Teknologi Elektro Pub Date : 2024-01-31 DOI: 10.23960/elc.v18n1.2606

Yenni Afrida, Ghaffaar Ari Satrya, Jeckson

{"title":"Pengaruh Panjang Jaringan Terhadap Drop Tegangan Pada Penyulang Duku dan Kurma PT. PLN (Persero) ULP Rumbia","authors":"Yenni Afrida, Ghaffaar Ari Satrya, Jeckson","doi":"10.23960/elc.v18n1.2606","DOIUrl":"https://doi.org/10.23960/elc.v18n1.2606","url":null,"abstract":"Voltage drops in distribution systems can occur in medium voltage networks (JTM), distribution transformers, low voltage networks (JTR) and house lines. Voltage drops in the network cause suboptimal distribution and increase power losses. PT. PLN (Persero) ULP Rumbia has two feeders with pure radial network characteristics sourced from the Seputih Banyak Main Substation. The length of the Duku Feeder network has a voltage of 96.8 KMS with a load of 150 A while the length of the Kurma Feeder network is 207.21 kV with a load of 155 A. The network reconfiguration of the Dente Teladas Substation was carried out to shorten the network length. This research aims to calculate the voltage drop that occurs at the Duku and Kurma feeders before and after network configuration. This research uses the quantity method to compare the calculation results with the voltage drop standards set by PT. PLN (Persero). After reconfiguring the Duku and Kurma feeders, there was an increase in tip voltage which indicated improvement. From the calculation results before adding the network to the Duku feeder, the voltage at the receiving end was 19.5 kV with a voltage drop of 7.1%, and at the Kurma feeder the voltage at the end of the line was 17 kV with a voltage drop of 19%. This is clearly no longer in accordance with the local TMP, and requires further study to overcome this problem. The voltage on the two feeders goes through a step up process using a Medium Voltage OLTC (On Load Tap Changer) so that the voltage on each feeder becomes between 19.86 kV to 20.16 kV.","PeriodicalId":193722,"journal":{"name":"Electrician : Jurnal Rekayasa dan Teknologi Elektro","volume":"52 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140470703","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Alat Pendeteksi Formalin Pada Makanan Tahu Dengan Monitoring Telegram 利用电报监控的豆腐食品中福尔马林检测工具

Electrician : Jurnal Rekayasa dan Teknologi Elektro Pub Date : 2024-01-31 DOI: 10.23960/elc.v18n1.2492

Rio Prayogo

{"title":"Alat Pendeteksi Formalin Pada Makanan Tahu Dengan Monitoring Telegram","authors":"Rio Prayogo","doi":"10.23960/elc.v18n1.2492","DOIUrl":"https://doi.org/10.23960/elc.v18n1.2492","url":null,"abstract":"Tahu merupakan lauk atau makanan yang banyak dikonsumsi oleh masyarakat, sebagai produk makanan olahan dari kedelai, tahu putih mengandung protein dan memiliki kandungan air yang tinggi sehingga sangat baik untuk pertumbuhan mikroorganisme pembusuk. Hal ini menyebabkan tahu tidak bertahan lama dan mudah rusak. Kerusakan tahu putih ditandai dengan bau asam dan berlendir. Praktik pengawetan yang sering dilakukan pedagang adalah merendam tahu dalam formalin, agar tahu tidak mudah hancur, tahan terhadap mikroorganisme, dan dapat bertahan hingga tujuh hari. formalin agar tidak terjadi hal-hal yang tidak diinginkan. dalam makanan.Berdasarkan permasalahan diatas maka perlu adanya penanganan khusus tentang penyalah gunaan zat formalin yang berlebihan pada makanan di indonesia sangat diperlukan pembatasan formalin International Programmeon Chemical Safe ty (IPCS) batas makanan yang mengandung formalin buatorang dewasa dalam satu hari adalah 0,2mg dalam air minum adalah 0,1mg per liter asupan yang diperbolehkan 1,5 –14 mg perhari. Dan juga menggunakan Sensor terbuat dari bahan polimer yang dikombinasikan dengan karbon aktif dan digunakan untuk mendeteksi zat formalin pada makanan, Dengan kemajuan teknologi yang terus berkembang hingga saat ini dengan mengembangkan produk berbasis internet dari hal-hal yang dapat saling berkomunikasi melalui internet. Kemudian alat dirancang untuk menyelesaikan permasalahan diatas penelitian akan membuat alat tersebut yaitu Alat Pendeteksi Formalin Pada Makanan Tahu Dengan Monitoring Telegram”. Sistem dari alat ini menggunakan sensor HCHO dan menggunakan mikrokontroller Node MCUESP 32 yang kemudian ditransfer melalui data base yang memberikan monitor lewat lcd dan di aplikasi Telegram smartphone android yang sudah dipasang aplikasi banyak tentunya agar memudahkan para pengguna sehingga bisa meneliti makanan yang berformalin dari jarak jauh melalui koneksi jaringan internet.","PeriodicalId":193722,"journal":{"name":"Electrician : Jurnal Rekayasa dan Teknologi Elektro","volume":"35 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140474794","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Optimasi Daya Keluaran PLTS Berdasarkan Sudut Kemiringan Di Institut Teknologi PLN Jakarta 雅加达 PLN 技术学院根据倾斜角度优化 PLTS 输出功率

Electrician : Jurnal Rekayasa dan Teknologi Elektro Pub Date : 2024-01-31 DOI: 10.23960/elc.v18n1.2534

Miftahul Fikri

引用次数: 0

Klasifikasi Penyakit Kanker Paru-Paru Menggunakan Algoritma Naïve Bayes dan Iterative Dichotomizer 3 (ID3) 使用奈夫贝叶斯算法和迭代二分法 3 (ID3) 进行肺癌疾病分类

Electrician : Jurnal Rekayasa dan Teknologi Elektro Pub Date : 2024-01-31 DOI: 10.23960/elc.v18n1.2519

P. Pratiwi, Dima Dwifa, A. Desiani, A. Amran, Bambang Suprihatin

{"title":"Klasifikasi Penyakit Kanker Paru-Paru Menggunakan Algoritma Naïve Bayes dan Iterative Dichotomizer 3 (ID3)","authors":"P. Pratiwi, Dima Dwifa, A. Desiani, A. Amran, Bambang Suprihatin","doi":"10.23960/elc.v18n1.2519","DOIUrl":"https://doi.org/10.23960/elc.v18n1.2519","url":null,"abstract":"Kanker paru-paru merupakan penyakit yang disebabkan oleh keganasan tumor dari bronkus. Pada tahun 2020 terdapat kasus kematian mencapai 30.843 jiwa. Agar menghambat angka kematian akibat kanker paru-paru, diperlukan alat untuk deteksi dini akibat kanker paru-paru. Pada penelitian ini menggunakan dataset kanker paru-paru yang memiliki 309 data. Teknik uji yang digunakan pada dataset kanker paru-paru ini adalah percentage split dan k-fold cross validation dengan algoritma naive bayes dan iterative dichotomizer 3 (ID3). Parameter penilaian yang digunakan untuk menentukan algoritma terbaik adalah akurasi, presisi dan recall. Hasil penelitian yang menggunakan teknik uji percentage split, diperoleh nilai akurasi, presisi dan recall tertinggi pada algoritma naive bayes yaitu akurasi sebesar 87%, presisi sebesar 91% dan recall sebesar 94% untuk kelas YES (positif lung cancer). Penelitian yang dilakukan dengan teknik uji menggunakan k-fold cross validation memberikan nilai terbaik pada algoritma ID3 dengan nilai akurasi 92%, presisi sebesar 94% dan recall sebesar 97% untuk kelas YES (positif lung cancer). Dengan demikian, penelitian yang dilakukan dengan metode k-fold cross validation memiliki nilai yang lebih tinggi dibandingkan nilai menggunakan teknik uji percentage split. Hal tersebut memberikan kesimpulan bahwa pada penelitian ini, diperoleh algoritma terbaik yaitu ID3 dengan teknik uji k-fold cross validation pada dataset kanker paru-paru.","PeriodicalId":193722,"journal":{"name":"Electrician : Jurnal Rekayasa dan Teknologi Elektro","volume":"21 ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140478925","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Sistem Pengering Biji Kakao dengan Menggunakan Metode Fuzzy Logic. 使用模糊逻辑方法的可可豆干燥系统

Electrician : Jurnal Rekayasa dan Teknologi Elektro Pub Date : 2024-01-31 DOI: 10.23960/elc.v18n1.2551

A. Atmaja, Jakariya Sembiring

引用次数: 0

Proses Perbaikan Data ODP (Optical Distribution Point) Tidak Sama dan Rename ODP Menggunakan UIM Tools Untuk Meluruskan Service di PT. TELKOM WITEL KARAWANG 在 PT. TELKOM WITEL KARAWANG 使用 UIM 工具修复不平等的 ODP（光分配点）数据并重新命名 ODP 以理顺服务的过程

Electrician : Jurnal Rekayasa dan Teknologi Elektro Pub Date : 2024-01-31 DOI: 10.23960/elc.v18n1.2503

Fatwa Fauzandi, Yuliarman Saragih

{"title":"Proses Perbaikan Data ODP (Optical Distribution Point) Tidak Sama dan Rename ODP Menggunakan UIM Tools Untuk Meluruskan Service di PT. TELKOM WITEL KARAWANG","authors":"Fatwa Fauzandi, Yuliarman Saragih","doi":"10.23960/elc.v18n1.2503","DOIUrl":"https://doi.org/10.23960/elc.v18n1.2503","url":null,"abstract":"Intisari — Penelitian ini mengenai perbaikan Optical Distribution Point (ODP) tidak sama dan rename ODP menggunakan UIM Tools pada unit OPTIMA di PT. Telkom Witel Karawang menyediakan service telekomunikasi, layanan informasi, dan layanan media pendidikan dan hiburan, untuk proses perbaikan Optical Distribution Point (ODP) tidak sama ini merupakan bagaian dari layanan telekomnukasi yang ada di unit OPTIMA dan salah satu masalah yang sering terjadi adalah ketidaksamaan data pada Optical Distribution Point (ODP) yang mengganggu kelancaran pelayanan, Optical Distribution Point (ODP) merupakan tempat terpusat di mana koneksi optik dari jaringan distribusi terhubung dengan pelanggan, Hasil dari implementasi ini adalah peningkatan kualitas layanan telekomunikasi di PT. Telkom Witel Karawang. Dengan data ODP yang akurat dan terbaru, proses layanan dapat berjalan dengan lancar dan efisien, dan penerapan solusi teknologi seperti UIM Tools dapat memberikan dampak baik bagi perusahaan dalam mengatasi masalah pelayanan dan meningkatkan kepuasan pelanggan. \u0000Kata kunci — Telekomunikasi, Layanan, Perbaikan, Gangguan, Optical Distribution Point (ODP), UIM Tools.","PeriodicalId":193722,"journal":{"name":"Electrician : Jurnal Rekayasa dan Teknologi Elektro","volume":"365 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140473174","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0