Processing and Characterization of Yttria-Stabilized Zirconia Foams for High-Temperature Applications

IF 18.6 1区材料科学 Q1 MATERIALS SCIENCE, CERAMICS

Journal of Advanced Ceramics Pub Date : 2013-12-19 DOI:10.1155/2013/785210

A. Herrera, A. Oliveira, A. P. N. Oliveira, D. Hotza

引用次数: 13

Abstract

In this work ceramic foams of 3 and 8 mol% yttria-stabilized zirconia (3YSZ and 8YSZ) were manufactured by the replication method using polystyrene-polyurethane foams with pore sizes in the 7–10 ppi range. A second coating was carried out on presintered foams in order to thicken struts and hinder microstructural defects. The produced ceramic foams were structurally and thermomechanically characterized. Samples recoated with 3YSZ presented the highest relative densities () which contributed to a better mechanical and thermal behavior.

查看原文本刊更多论文

高温氧化钇稳定氧化锆泡沫的制备与表征

本文以孔径在7-10 ppi范围内的聚苯乙烯-聚氨酯泡沫为原料，采用复制法制备了3和8 mol%钇稳定氧化锆(3YSZ和8YSZ)的陶瓷泡沫。为了增厚支柱，防止微结构缺陷，在预熔泡沫上进行了第二次涂层。对制备的泡沫陶瓷进行了结构和热力学表征。复涂3YSZ的样品呈现出最高的相对密度()，这有助于更好的力学和热行为。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Advanced Ceramics MATERIALS SCIENCE, CERAMICS-

CiteScore

21.00

自引率

10.70%

发文量

290

审稿时长

14 days

期刊介绍： Journal of Advanced Ceramics is a single-blind peer-reviewed, open access international journal published on behalf of the State Key Laboratory of New Ceramics and Fine Processing (Tsinghua University, China) and the Advanced Ceramics Division of the Chinese Ceramic Society. Journal of Advanced Ceramics provides a forum for publishing original research papers, rapid communications, and commissioned reviews relating to advanced ceramic materials in the forms of particulates, dense or porous bodies, thin/thick films or coatings and laminated, graded and composite structures.