Numerical and Experimental Study of the Use of Mineral Pumice in the Core of the Sandwich Panel to Absorb the Shock Wave

IF 1.3 Q3 ENGINEERING, MECHANICAL

PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING Pub Date : 2023-01-09 DOI:10.3311/ppme.19341

Mahmoud Kaffash Mirzarahimi, H. Khodarahmi, M. Ziashamami, R. Hosseini

{"title":"Numerical and Experimental Study of the Use of Mineral Pumice in the Core of the Sandwich Panel to Absorb the Shock Wave","authors":"Mahmoud Kaffash Mirzarahimi, H. Khodarahmi, M. Ziashamami, R. Hosseini","doi":"10.3311/ppme.19341","DOIUrl":null,"url":null,"abstract":"Reducing the effects of unwanted shocks and waves is a very common problem in engineering. Some materials, due to their inherent properties, can be used as energy absorbers, such as foams, porous materials, and granular materials. porous granular materials that were considered in this study due to their low density and energy absorption capacity. But to use the granular material as the core of the sandwich panel, you have to think of a way to hold the granules together. In this article, using molding with resin, aluminum and polyurethane foam, an attempt has been made to make cores for sandwich panels from mineral pumice. the use of foam showed better performance than the other two materials. These adsorbents have the property of substrate flexibility and impact absorption and low density of porous materials at the same time. The properties of the core were obtained using a pressure test and used in software. Explosion experiments are free and Abaqus software is used in the simulation. The results show that the panel with a thicker back cover has a better performance in absorbing explosion energy. Increasing the thickness of the core has also increased energy absorption.","PeriodicalId":43630,"journal":{"name":"PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING","volume":null,"pages":null},"PeriodicalIF":1.3000,"publicationDate":"2023-01-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3311/ppme.19341","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}

引用次数: 0

Abstract

Reducing the effects of unwanted shocks and waves is a very common problem in engineering. Some materials, due to their inherent properties, can be used as energy absorbers, such as foams, porous materials, and granular materials. porous granular materials that were considered in this study due to their low density and energy absorption capacity. But to use the granular material as the core of the sandwich panel, you have to think of a way to hold the granules together. In this article, using molding with resin, aluminum and polyurethane foam, an attempt has been made to make cores for sandwich panels from mineral pumice. the use of foam showed better performance than the other two materials. These adsorbents have the property of substrate flexibility and impact absorption and low density of porous materials at the same time. The properties of the core were obtained using a pressure test and used in software. Explosion experiments are free and Abaqus software is used in the simulation. The results show that the panel with a thicker back cover has a better performance in absorbing explosion energy. Increasing the thickness of the core has also increased energy absorption.

查看原文本刊更多论文

利用矿物浮石在夹层板芯处吸收激波的数值与实验研究

减少不必要的冲击和波的影响是工程中一个非常普遍的问题。一些材料，由于其固有的性质，可以用作能量吸收剂，如泡沫、多孔材料和颗粒材料。多孔颗粒材料由于其低密度和能量吸收能力而被考虑在本研究中。但要使用颗粒材料作为夹层板的核心，你必须想办法把颗粒固定在一起。本文采用树脂、铝和聚氨酯泡沫成型的方法，尝试用矿物浮石制作夹芯板芯。泡沫塑料的使用表现出比其他两种材料更好的性能。这些吸附剂同时具有基材柔韧性和冲击吸收性以及多孔材料的低密度特性。通过压力测试获得了岩心的性能，并在软件中进行了应用。爆炸实验是免费的，模拟使用Abaqus软件。结果表明，后盖越厚的面板吸收爆炸能量的性能越好。增加芯的厚度也增加了能量吸收。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING ENGINEERING, MECHANICAL-

CiteScore

2.80

自引率

7.70%

发文量

审稿时长

20 weeks

期刊介绍： Periodica Polytechnica is a publisher of the Budapest University of Technology and Economics. It publishes seven international journals (Architecture, Chemical Engineering, Civil Engineering, Electrical Engineering, Mechanical Engineering, Social and Management Sciences, Transportation Engineering). The journals have free electronic versions.