"Al24.2Si3.25Cu24.2Ni24.2Ti24.2 high-entropy intermetallic alloy: Effect of nitrogen environment sintered microstructure and mechanical properties "

IF 0.7 4区材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY

Kovove Materialy-Metallic Materials Pub Date : 2022-06-17 DOI:10.31577/km.2022.3.163

S. Hassan, G. Nadhreen

引用次数: 0

Abstract

In this study, a lightweight Al 24 . 2 Si 3 . 25 Cu 24 . 2 Ni 24 . 2 Ti 24 . 2 high-entropy alloy was developed by sonication blending of the pure elements followed by the high-temperature sintering in the nitrogen gas environment. Microstructural characterization of the sintered alloy showed a fair dispersion of the elemental particles in the matrix during the blending process and the absorption of nitrogen, which led to the formation of multiple intermetallic compounds, including the nitrides, during the sintering process. Mechanical characterization of the sintered alloy revealed signiﬁcantly high microhardness values with relatively lower compressive strength in Al 24 . 2 Si 3 . 25 Cu 24 . 2 Ni 24 . 2 Ti 24 . 2 alloy.

查看原文本刊更多论文

Al24.2Si3.25Cu24.2Ni24.2Ti24.2高熵金属间合金:氮环境烧结组织和力学性能的影响

在这项研究中，一个轻量级的al24。2 Si 3。25 Cu 24。2 . Ni 24。2 Ti 24。采用纯元素超声共混，再在氮气环境下高温烧结的方法制备了高熵合金。烧结合金的显微组织表征表明，在共混过程中，元素颗粒在基体中均匀分散，氮的吸收导致烧结过程中形成包括氮化物在内的多种金属间化合物。烧结合金的力学性能表明，al24的显微硬度值较高，而抗压强度相对较低。2 Si 3。25 Cu 24。2 . Ni 24。2 Ti 24。2合金。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Kovove Materialy-Metallic Materials MATERIALS SCIENCE, MULTIDISCIPLINARY-METALLURGY & METALLURGICAL ENGINEERING

CiteScore

1.20

自引率

14.30%

发文量

审稿时长

3 months

期刊介绍： Kovove Materialy - Metallic Materials is dedicated to publishing original theoretical and experimental papers concerned with structural, nanostructured, and functional metallic and selected non-metallic materials. Emphasis is placed on those aspects of the science of materials that address: the relationship between the microstructure of materials and their properties, including mechanical, electrical, magnetic and chemical properties; the relationship between the microstructure of materials and the thermodynamics, kinetics and mechanisms of processes; the synthesis and processing of materials, with emphasis on microstructural mechanisms and control; advances in the characterization of the microstructure and properties of materials with experiments and models which help in understanding the properties of materials.