Evaluation of Properties of MMC Al 6061 with Boron Carbide and Silicon Carbide as Reinforcements

Q3 Engineering

International Journal of Vehicle Structures and Systems Pub Date : 2022-12-25 DOI:10.4273/ijvss.14.7.12

B. Sureshbabu, P. Gopi Krishnan, A. Lalitha Saravanan, M. Mohamed Irfan, T. Naveenkumar, G. Dinesh Babu, S.B. Harshavarthan

引用次数: 0

Abstract

This research examines the properties of metal matrix composites (MMCs) made from aluminium 6061 T6 with boron carbide and silicon carbide. Aluminium material is a matrix metal with appealing features such as lightweight in nature, high strength and machining with ease. Stir casting is less expensive, simple and used for mass production of MMCs. By adding B4C as (2%, 4%, 6% and 8%) and SiC as constant (5%) reinforcement, the samples are fabricated. The hardness in the material tends to extend by adding the proportion of reinforcement in the metal matrix. Increasing the content of B4C and SiC particles, the MMCs have superior wear resistance.

查看原文本刊更多论文

碳化硼和碳化硅增强MMC Al 6061的性能评价

本文研究了碳化硼和碳化硅制备的6061 T6铝基复合材料的性能。铝材料是一种基体金属，具有重量轻、强度高、加工方便等特点。搅拌铸造成本较低，操作简单，可用于mmc的批量生产。通过添加B4C(2%、4%、6%和8%)和SiC(5%)等增强剂制备样品。在金属基体中加入一定比例的增强剂，材料的硬度有延长的趋势。随着B4C和SiC颗粒含量的增加，复合材料具有较好的耐磨性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Journal of Vehicle Structures and Systems Engineering-Mechanical Engineering

CiteScore

0.90

自引率

0.00%

发文量

期刊介绍： The International Journal of Vehicle Structures and Systems (IJVSS) is a quarterly journal and is published by MechAero Foundation for Technical Research and Education Excellence (MAFTREE), based in Chennai, India. MAFTREE is engaged in promoting the advancement of technical research and education in the field of mechanical, aerospace, automotive and its related branches of engineering, science, and technology. IJVSS disseminates high quality original research and review papers, case studies, technical notes and book reviews. All published papers in this journal will have undergone rigorous peer review. IJVSS was founded in 2009. IJVSS is available in Print (ISSN 0975-3060) and Online (ISSN 0975-3540) versions. The prime focus of the IJVSS is given to the subjects of modelling, analysis, design, simulation, optimization and testing of structures and systems of the following: 1. Automotive vehicle including scooter, auto, car, motor sport and racing vehicles, 2. Truck, trailer and heavy vehicles for road transport, 3. Rail, bus, tram, emerging transit and hybrid vehicle, 4. Terrain vehicle, armoured vehicle, construction vehicle and Unmanned Ground Vehicle, 5. Aircraft, launch vehicle, missile, airship, spacecraft, space exploration vehicle, 6. Unmanned Aerial Vehicle, Micro Aerial Vehicle, 7. Marine vehicle, ship and yachts and under water vehicles.