Temperature and Heat Partition Testing in the Cutting Zone for Turning AISI 321 Steel

IF 1.2 4区工程技术 Q3 ENGINEERING, MECHANICAL

Strojniski Vestnik-Journal of Mechanical Engineering Pub Date : 2020-11-15 DOI:10.5545/sv-jme.2020.6840

M. Bartoszuk

引用次数: 0

Abstract

This article shows selected results of experimental tests and the results of analytical and numerical modelling of the thermal characteristics of the cutting process. The tests were conducted for the case of the dry turning of austenitic steel AISI 321 with cutting tools with a flat rake face. The research aimed to determine the actual division of thermal fluxes in the zone of contact between the chip and the rake face. As a result of such work, a formula for a new heat partition coefficient and a formula for calculating the average contact temperature were developed. The results showed that the formulas developed can be a useful tool to estimate heat distribution in the cutting zone quickly.

查看原文本刊更多论文

AISI 321钢车削区温度和热分区试验

本文给出了切削过程热特性分析和数值模拟的部分实验结果和结果。以aisi321奥氏体钢为研究对象，进行了扁前面刀具干式车削试验。该研究旨在确定切屑与前刀面接触区域的实际热通量划分。在此基础上，推导出了新的热分配系数公式和平均接触温度计算公式。结果表明，所建立的公式可作为快速估算切削区热分布的有效工具。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Strojniski Vestnik-Journal of Mechanical Engineering 工程技术-工程：机械

CiteScore

3.00

自引率

17.60%

发文量

审稿时长

4.1 months

期刊介绍： The international journal publishes original and (mini)review articles covering the concepts of materials science, mechanics, kinematics, thermodynamics, energy and environment, mechatronics and robotics, fluid mechanics, tribology, cybernetics, industrial engineering and structural analysis. The journal follows new trends and progress proven practice in the mechanical engineering and also in the closely related sciences as are electrical, civil and process engineering, medicine, microbiology, ecology, agriculture, transport systems, aviation, and others, thus creating a unique forum for interdisciplinary or multidisciplinary dialogue.