Commissioning of L-band intense electron linac for industrial applications

S. Kim, H.R. Yang, M. Cho, W. Namkung, S. Jang, S.J. Kwon, Y. Son, S. Park, J. Oh
{"title":"Commissioning of L-band intense electron linac for industrial applications","authors":"S. Kim, H.R. Yang, M. Cho, W. Namkung, S. Jang, S.J. Kwon, Y. Son, S. Park, J. Oh","doi":"10.1109/PLASMA.2008.4590859","DOIUrl":null,"url":null,"abstract":"An intense L-band electron linear accelerator is under construction at CESC (Cheorwon Electron-beam Service Center) for industrial applications. It is capable of producing 10-MeV electron beams with 30-kW average beam power. For high-power capability, we adopted 1.3 GHz, and the RF source is a 25-MW pulsed klystron with 60-kW average RF output power. The PFN-type modulator and the matched transformer provide 264-kV beam voltage with 230-A beam current to the klystron. The RF pulse length is 7 mus, and the repetition rate is 350 Hz. The thermionic E-gun generates 80-kV electron beams with pulsed 1.6 A. The pre-buncher, a single standing-wave cavity, is used before the bunching section, which is built-in with the regular accelerating section. The accelerating structure is a disk-loaded waveguide with a constant-impedance operated in the 2pi/3-mode. It is to be operated under the fully beam-loaded condition, where the beam power is maximum. The electron beams are accelerated within 6 mus since the traveling-wave filling time of the accelerating structure is almost 0.8 mus. In this paper, we present details of the accelerator system and commissioning results.","PeriodicalId":6359,"journal":{"name":"2008 IEEE 35th International Conference on Plasma Science","volume":"137 1","pages":"1-1"},"PeriodicalIF":0.0000,"publicationDate":"2008-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2008 IEEE 35th International Conference on Plasma Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/PLASMA.2008.4590859","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

An intense L-band electron linear accelerator is under construction at CESC (Cheorwon Electron-beam Service Center) for industrial applications. It is capable of producing 10-MeV electron beams with 30-kW average beam power. For high-power capability, we adopted 1.3 GHz, and the RF source is a 25-MW pulsed klystron with 60-kW average RF output power. The PFN-type modulator and the matched transformer provide 264-kV beam voltage with 230-A beam current to the klystron. The RF pulse length is 7 mus, and the repetition rate is 350 Hz. The thermionic E-gun generates 80-kV electron beams with pulsed 1.6 A. The pre-buncher, a single standing-wave cavity, is used before the bunching section, which is built-in with the regular accelerating section. The accelerating structure is a disk-loaded waveguide with a constant-impedance operated in the 2pi/3-mode. It is to be operated under the fully beam-loaded condition, where the beam power is maximum. The electron beams are accelerated within 6 mus since the traveling-wave filling time of the accelerating structure is almost 0.8 mus. In this paper, we present details of the accelerator system and commissioning results.
工业用l波段强电子直线加速器的调试
铁原电子束服务中心(CESC)正在建设用于工业应用的强l波段电子直线加速器。它能够以30千瓦的平均束流功率产生10兆电子伏的电子束。对于大功率能力,我们采用1.3 GHz,射频源为25mw脉冲速调管,平均射频输出功率为60kw。pfn型调制器和匹配的变压器为速调管提供264 kv的波束电压和230 a的波束电流。射频脉冲长度为7 μ m,重复频率为350hz。热离子电子枪产生80kv的脉冲1.6 A电子束。在聚束段之前使用预聚束器,一个单驻波腔,它与常规加速段内置在一起。加速结构是一个圆盘加载波导,具有恒定阻抗,工作在2pi/3模式下。它是在全梁载条件下运行的,此时梁功率最大。由于加速结构的行波填充时间几乎为0.8 μ m,电子束在6 μ m内被加速。在本文中,我们介绍了加速器系统的细节和调试结果。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信