Development and Implementation of Two Compression Set Tools in a Wellbore Clean Out String

Abstract

Running two compression set tools in a single wellbore clean out string, typically a bypass tool and negative test packer, has been a significant industry challenge to operate reliably. The need for running these types of tools is generally driven by the need to perform a negative test on a liner top and achieve high flow rates necessary to hydraulically remove debris from the well. Combining these operations into a single run is an increasingly common method to reduce rig time and cost for the operator. Tools to perform this type of operation are generally available from many service providers, however difficulties and challenges arise when trying to manipulate two different tools in the same string that function by the same compression set method. These operations do have a history that is partially successful, however on a long term basis reliability is generally considered poor by most operators, as a failure to manipulate the tools correctly can result in a failed run and a trip out of the hole. This paper discusses the development and successful field deployment of a system of two compression set tools to address this specific challenge while improving reliability over existing solutions.