Behavioural Investigation of Hardness Profile for Dissimilar TIG-Weldment between P22 and P91 Steels

Q3 Engineering

International Journal of Vehicle Structures and Systems Pub Date : 2023-04-03 DOI:10.4273/ijvss.15.1.06

B. Singh, S. Palli, Parmod Kumar, S. Bahl

引用次数: 0

Abstract

The Gas Tungsten Arc Welding (GTAW) is now commonly being used to join condenser pipes of railway locomotives, beside boiler and super heater tubes, generally made from dissimilar steel-alloys like P22 (2.25Cr-1Mo) and P91 (9Cr-1Mo). After welding, excessive hardness values of the Heat Affected Zones (HAZs) of those dissimilar weld joints are certainly obtained due to uneven and uncontrolled cooling rates, which resulted in an eruption of abrupt martensitic transformations. This ultimately leads to cracking and failure while operating at elevated temperatures. Therefore, there is a dire need to establish an appropriately optimized post-weld heat treatment process to eliminate this hazardous nuisance. The present work statistically studies the hardness profile of these critical material zones, before and after GTAW.

查看原文本刊更多论文

P22和P91钢异种tig焊件硬度分布的行为研究

钨极气体保护焊(GTAW)现在普遍用于连接铁路机车的冷凝器管，除了锅炉和过热器管，一般由不同的钢合金，如P22 (2.25Cr-1Mo)和P91 (9Cr-1Mo)。焊接后，由于冷却速度的不均匀和不控制，不同焊接接头的热影响区(haz)硬度值过高，导致马氏体突变的爆发。这最终导致在高温下工作时开裂和失效。因此，迫切需要建立一个适当优化的焊后热处理工艺，以消除这种危险的滋扰。本文统计研究了GTAW前后这些关键材料区的硬度分布。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Journal of Vehicle Structures and Systems Engineering-Mechanical Engineering

CiteScore

0.90

自引率

0.00%

发文量

期刊介绍： The International Journal of Vehicle Structures and Systems (IJVSS) is a quarterly journal and is published by MechAero Foundation for Technical Research and Education Excellence (MAFTREE), based in Chennai, India. MAFTREE is engaged in promoting the advancement of technical research and education in the field of mechanical, aerospace, automotive and its related branches of engineering, science, and technology. IJVSS disseminates high quality original research and review papers, case studies, technical notes and book reviews. All published papers in this journal will have undergone rigorous peer review. IJVSS was founded in 2009. IJVSS is available in Print (ISSN 0975-3060) and Online (ISSN 0975-3540) versions. The prime focus of the IJVSS is given to the subjects of modelling, analysis, design, simulation, optimization and testing of structures and systems of the following: 1. Automotive vehicle including scooter, auto, car, motor sport and racing vehicles, 2. Truck, trailer and heavy vehicles for road transport, 3. Rail, bus, tram, emerging transit and hybrid vehicle, 4. Terrain vehicle, armoured vehicle, construction vehicle and Unmanned Ground Vehicle, 5. Aircraft, launch vehicle, missile, airship, spacecraft, space exploration vehicle, 6. Unmanned Aerial Vehicle, Micro Aerial Vehicle, 7. Marine vehicle, ship and yachts and under water vehicles.