INVESTIGATION OF TENSILE STRENGTH OF THREE NEW SOFT SILICONE ELASTOMERS AND COMPARISON WITH RESULTS OF PREVIOUSLY TESTED MATERIAL

Q3 Engineering

Journal of the Balkan Tribological Association Pub Date : 2014-05-02 DOI:10.1201/b15300-15

W. Więckiewicz, R. Orlicki, G. Zaikov

{"title":"INVESTIGATION OF TENSILE STRENGTH OF THREE NEW SOFT SILICONE ELASTOMERS AND COMPARISON WITH RESULTS OF PREVIOUSLY TESTED MATERIAL","authors":"W. Więckiewicz, R. Orlicki, G. Zaikov","doi":"10.1201/b15300-15","DOIUrl":null,"url":null,"abstract":"The aim of the study was to investigate tensile strength of 3 soft silicone elstomers: A-soft line 30, Elite Super Soft, Bosworth Dentusil and to compare them with the results of investigation of Ufi Gel SC.48 samples were prepared - 12 of each material. The sample consisted of two parts: 20 mm long and 4 mm in diameter acrylic cylinder, and 20 mm long and 4 mm in diameter silicone cylinder. Both parts of the sample were connected with glue prepared by the manufacturer. Investigation of the tensile strength of the materials A-soft line 20, Elite Super Soft, Bosworth Dentusil was carried out on a testing machine Houndfield H5KS model THE S/N D83281and investigation of the tensile strength of Ufi Gel SC was carried out using a testing machine FPZ 10/1.The average value of the tensile strength of A-soft line 30 was 9,63 N, of Bosworth Dentusil - 7.50 N and that of Elite Super Soft - 7.29 N, while that of Ufi Gel SC was 18.61 N.Ufi Gel SC is characterised by the best tensile strength, followed by A-soft line 30, Bosworth Dentusil and Elite Super Soft. Each of the estimated material can be used in prosthodontic treatment in patients, depending on the necessity of relieving the prosthetic base.","PeriodicalId":50006,"journal":{"name":"Journal of the Balkan Tribological Association","volume":"19 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2014-05-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of the Balkan Tribological Association","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1201/b15300-15","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}

引用次数: 0

Abstract

The aim of the study was to investigate tensile strength of 3 soft silicone elstomers: A-soft line 30, Elite Super Soft, Bosworth Dentusil and to compare them with the results of investigation of Ufi Gel SC.48 samples were prepared - 12 of each material. The sample consisted of two parts: 20 mm long and 4 mm in diameter acrylic cylinder, and 20 mm long and 4 mm in diameter silicone cylinder. Both parts of the sample were connected with glue prepared by the manufacturer. Investigation of the tensile strength of the materials A-soft line 20, Elite Super Soft, Bosworth Dentusil was carried out on a testing machine Houndfield H5KS model THE S/N D83281and investigation of the tensile strength of Ufi Gel SC was carried out using a testing machine FPZ 10/1.The average value of the tensile strength of A-soft line 30 was 9,63 N, of Bosworth Dentusil - 7.50 N and that of Elite Super Soft - 7.29 N, while that of Ufi Gel SC was 18.61 N.Ufi Gel SC is characterised by the best tensile strength, followed by A-soft line 30, Bosworth Dentusil and Elite Super Soft. Each of the estimated material can be used in prosthodontic treatment in patients, depending on the necessity of relieving the prosthetic base.

查看原文本刊更多论文

三种新型软硅弹性体抗拉强度的研究及与以往试验材料的比较

本研究的目的是研究3种软硅树脂的抗拉强度:A-soft line 30, Elite Super soft, Bosworth Dentusil，并将其与Ufi Gel sc的研究结果进行比较。每种材料制备48个样品- 12个。样品由两部分组成:长20毫米、直径4毫米的丙烯酸圆柱体和长20毫米、直径4毫米的硅胶圆柱体。样品的两个部分都用厂家配制的胶水连接。在Houndfield H5KS型号the S/N d83281试验机上对a - Soft line 20、Elite Super Soft、Bosworth Dentusil材料的拉伸强度进行了研究，在FPZ 10/1试验机上对Ufi Gel SC材料的拉伸强度进行了研究。A-soft line 30的抗拉强度平均值为9.63 N, Bosworth Dentusil - 7.50 N和Elite Super Soft - 7.29 N, Ufi Gel SC的抗拉强度平均值为18.61 N, Ufi Gel SC的抗拉强度最好，A-soft line 30、Bosworth Dentusil和Elite Super Soft的抗拉强度依次为。每一种估计的材料都可以用于患者的修复治疗，这取决于解除义肢基座的必要性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of the Balkan Tribological Association 工程技术-工程：机械

CiteScore

1.10

自引率

0.00%

发文量

审稿时长

3.0 months

期刊介绍： The decision for editing and printing of the current journal was taken on Balkantrib''93, Sofia, October, 1993 during the Round Table discussion of the representatives of the Balkan countries: Bulgaria. Greece, Former Yugoslavian Republic of Macedonia, Romania, Turkey and Yugoslavia. The Journal of the Balkan Tribological Assosiation is dedicated to the fundamental and technological research of the third principle in nature - the contacts. The journal will act as international focus for contacts between the specialists working in fundamental and practical areas of tribology. The main topics and examples of the scientific areas of interest to the Journal are: overall tribology; tribotechnics and tribomechanics; friction, lubrication, abrasive wear, boundary lubrication, adhesion, cavitation, corrosion, computer simulation, vibration phenomena, mechanical contacts in gaseous, liquid and solid phase, technological tribological processes, coatings, etc.; tribochemistry - defects in solid bodies, tribochemical emissions, triboluminescence, tribochemiluminescence, technological tribochemistry; composite materials, polymeric materials in mechanics and tribology; special materials in military and space technologies, etc.; kinetics, thermodynamics and mechanism of tribochemical processes; biotribology - biological tribology, tribophysiotherapy, tribological wear, biological tribotechnology, etc.; lubrication - solid, semi-liquid lubricants, additives for oils and lubricants, surface phenomena. wear in the presence of lubricants; lubricity of fuels; ecological tribology; the role of tribology in the sustainable development of technology: management and organisation of the production; machinery breakdown; oil monitoring; European legislation in the field of tribotechnics and lubricating oils; educational problems in tribology, lubricating oils and fuels.