Electroanalytical Performance of a Carbon Paste Electrode Modified by Coffee Husks for the Quantification of Acetaminophen in Quality Control of Commercialized Pharmaceutical Tablets

Abstract

Electrochemical determination of acetaminophen (APAP) was successfully performed using a carbon paste electrode (CPE)modified with coffee husks (CH-CPE). Scanning electron microscopy (SEM) and SEM-energy dispersive X-ray spectroscopy (SEM-EDX) were, respectively, used for the morphological and elemental characterization of coffee husks prior to their utilization. Theelectrochemical oxidation of APAP was investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and squarewave voltammetry (SWV). SWV technique appeared to be more sensitive since the oxidation current of APAP was twofold higherwith the CH-CPE sensor than with the bare CPE, in relation to the increase in the organophilic character of the electrode surface.Furthermore, on CH-CPE, the current response of APAP varied linearly with its concentration in the range of 6.6????M to 0.5 mM,leading to a detection limit of 0.66????M(????/????=3). Finally, the proposed CH-CPE sensor was successfully used to determine theamount of APAP in commercialized tablets (Doliprane�500 and Doliprane 1000), with a recovery rate ranging from 98% to 103%.This novel sensor opens the way for the development of low-cost and reliable devices for the electroanalysis of pharmaceuticalformulations in developing countries.