Effect of Zr/Ti Ratio on Piezoelectric and Dielectric Propertiesof 0.1Pb[Fe1/2Nb1/2]O3-0.9Pb[ZrxTi(1–x)]O30 Ceramics

IF 1.5 4区材料科学 Q3 MATERIALS SCIENCE, CERAMICS

Transactions of the Indian Ceramic Society Pub Date : 2021-01-02 DOI:10.1080/0371750X.2021.1871647

L. Hamzioui, F. Kahoul, Abdrazek Guemache, M. Aillerie, A. Boutarfaia

引用次数: 2

Abstract

This study describes the microstructure, crystal structure, dielectric and piezoelectric behavior of 0.1Pb[Fe1/2Nb1/2]O3-0.9Pb[ZrxTi(1–x)]O3 (x = 0.49-0.55) ceramics synthesized by solid-state reaction. Compositions were sintered at 1180oC for 120 min. Dense and uniform microstructure was seen through microstructural analysis. XRD pattern confirmed the co-existence of tetragonal and rhombohedral perovskite phases in these compositions where 0.51 ≤ x ≤ 0.53. Compositions with 0.51 ≤ x ≤ 0.53 resulted in the optimum values of properties, viz. dielectric constant (ϵrr) of 1150, piezoelectric coefficient (d31 ) of 95x10–12 C/N, piezoelectric voltage constant (g31 ) of 70x10–3 mV/N and the coupling factor (kp ) value of 0.67. Results indicated that this material composition could be suitable for power harvesting and sensor applications. GRAPHICAL ABSTRACT

查看原文本刊更多论文

Zr/Ti比对0.1Pb[Fe1/2Nb1/2]O3-0.9Pb[ZrxTi(1-x)]O30陶瓷压电和介电性能的影响

本研究描述了通过固态反应合成的0.1Pb[Fe1/2Nb1/2]O3-0.9Pb[ZrxTi（1–x）]O3（x=0.49-0.55）陶瓷的微观结构、晶体结构、介电和压电行为。将组合物在1180℃下烧结120分钟。通过微观结构分析，可以看到致密均匀的微观结构。XRD图谱证实，在0.51≤x≤0.53的组成中，四方和菱形钙钛矿相共存。0.51≤x≤0.53的组分产生了最佳的性能值，即介电常数（εrr）为1150，压电系数（d31）为95x10–12 C/N，压电电压常数（g31）为70x10–3 mV/N，耦合因子（kp）值为0.67。结果表明，该材料组合物可适用于功率采集和传感器应用。图形摘要

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Transactions of the Indian Ceramic Society 工程技术-材料科学：硅酸盐

CiteScore

2.40

自引率

8.30%

发文量

审稿时长

2.3 months

期刊介绍： Transactions of the Indian Ceramic Society is a quarterly Journal devoted to current scientific research, technology and industry-related news on glass and ceramics. The Journal covers subjects such as the chemical, mechanical, optical, electronic and spectroscopic properties of glass and ceramics, and characterization of materials belonging to this family. The Editor invites original research papers, topical reviews, opinions and achievements, as well as industry profiles for publication. The contributions should be accompanied by abstracts, keywords and other details, as outlined in the Instructions for Authors section. News, views and other comments on activities of specific industries and organizations, and also analyses of industrial scenarios are also welcome.