Numerical investigation of local scour around a 2-degree of freedom vibrating subsea pipeline in steady flow under sagging condition

IF 4.6 2区 工程技术 Q1 ENGINEERING, CIVIL
Vatsal Dhamelia, Ming Zhao, Pan Hu, Heath Palmer
{"title":"Numerical investigation of local scour around a 2-degree of freedom vibrating subsea pipeline in steady flow under sagging condition","authors":"Vatsal Dhamelia,&nbsp;Ming Zhao,&nbsp;Pan Hu,&nbsp;Heath Palmer","doi":"10.1016/j.oceaneng.2024.119890","DOIUrl":null,"url":null,"abstract":"<div><div>Numerical simulations are conducted to investigate the local scour below a sagging subsea pipeline vibrating in two degrees of freedom (2-DOF), covering a sagging ratio from −0.3 to 0 and a wide range of reduced velocities from 0.5 to 15. A negative sagging ratio means that the static balance position of the bottom surface of the pipeline is below the sand surface. The combined effects of the sagging and 2-DOF vibration of the pipeline on the scour are investigated. The maximum scour depth of the 2-DOF vibrating pipeline in the lock-in range of the vibration increases by 10% compared to the 1-DOF; however, the reduced velocity where the maximum scour depth occurs changes from 5 to 6. The variations of the vibration amplitude with the reduced velocity for all the sagging ratios follow a similar trend. For embedment ratios of −0.4 to −0.3, initial condition of scour simulation affects the equilibrium scour depth and vibration amplitudes. Simulations with a flat sand surface as initial condition prevent full scour development because the pipeline reaches its static balance position due to weak flow through the pipeline-to-bed gap. However, if the simulation starts with a sufficiently large initial scour depth, scour can reach its equilibrium.</div></div>","PeriodicalId":19403,"journal":{"name":"Ocean Engineering","volume":"315 ","pages":"Article 119890"},"PeriodicalIF":4.6000,"publicationDate":"2024-11-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ocean Engineering","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0029801824032281","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, CIVIL","Score":null,"Total":0}
引用次数: 0

Abstract

Numerical simulations are conducted to investigate the local scour below a sagging subsea pipeline vibrating in two degrees of freedom (2-DOF), covering a sagging ratio from −0.3 to 0 and a wide range of reduced velocities from 0.5 to 15. A negative sagging ratio means that the static balance position of the bottom surface of the pipeline is below the sand surface. The combined effects of the sagging and 2-DOF vibration of the pipeline on the scour are investigated. The maximum scour depth of the 2-DOF vibrating pipeline in the lock-in range of the vibration increases by 10% compared to the 1-DOF; however, the reduced velocity where the maximum scour depth occurs changes from 5 to 6. The variations of the vibration amplitude with the reduced velocity for all the sagging ratios follow a similar trend. For embedment ratios of −0.4 to −0.3, initial condition of scour simulation affects the equilibrium scour depth and vibration amplitudes. Simulations with a flat sand surface as initial condition prevent full scour development because the pipeline reaches its static balance position due to weak flow through the pipeline-to-bed gap. However, if the simulation starts with a sufficiently large initial scour depth, scour can reach its equilibrium.
下垂条件下稳定流中 2 自由度振动海底管道周围局部冲刷的数值研究
通过数值模拟研究了在两个自由度(2-DOF)下振动的下垂海底管道下方的局部冲刷情况,涵盖了-0.3 到 0 的下垂率和 0.5 到 15 的宽减速度范围。负下垂率意味着管道底面的静平衡位置低于沙面。研究了管道下陷和 2-DOF 振动对冲刷的综合影响。与 1-DOF 相比,2-DOF 振动管道在振动锁定范围内的最大冲刷深度增加了 10%;但是,出现最大冲刷深度的减速度从 5 变为 6。所有下沉比的振动振幅随减小速度的变化趋势相似。对于-0.4 至-0.3 的嵌入比,冲刷模拟的初始条件会影响平衡冲刷深度和振幅。以平坦沙面为初始条件进行模拟时,由于流经管道与床面间隙的水流较弱,管道会达到静态平衡位置,因此不会出现全面冲刷。但是,如果模拟开始时的初始冲刷深度足够大,冲刷就会达到平衡。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Ocean Engineering
Ocean Engineering 工程技术-工程:大洋
CiteScore
7.30
自引率
34.00%
发文量
2379
审稿时长
8.1 months
期刊介绍: Ocean Engineering provides a medium for the publication of original research and development work in the field of ocean engineering. Ocean Engineering seeks papers in the following topics.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信