{"title":"Enhancement of dielectric constant in Sm:Zr co-doped HfO2 films synthesized by cost-effective method","authors":"Sabhya, Dhananjaya Kekuda, Mohan Rao K","doi":"10.1016/j.ceramint.2024.09.372","DOIUrl":null,"url":null,"abstract":"<div><div>Sm, Zr co-doped HfO<sub>2</sub> films were deposited on a p-type silicon wafer using a cost-effective spin coating method. The influence of Sm, Zr co-doping concentration variation on structural, compositional, morphological, and electrical properties was examined. The dominance of the orthorhombic phase (o-phase) in comparison to the monoclinic phase was noted to rise with the simultaneous increment of Sm doping concentration and decrement of Zr concentration. A decrease in oxygen vacancies was noted for all the Sm, Zr co-doped HfO<sub>2</sub> films from XPS results. Nonporous and uniform distribution of grains was observed from Field Emission Scanning Electron Microscope (FESEM) and Atomic Force Microscopy (AFM) studies. Electrical studies of MOS capacitors based on Sm, Zr co-doped HfO<sub>2</sub> films revealed a low leakage current. C-V studies exhibited an increment of dielectric constant and a decrement of interface trap densities. Further, to obtain insights into the microscopic features of Sm, Zr co-doped films, impedance and modulus studies have been performed. The obtained results imply the potential of tuning Sm, Zr co-doping concentrations in HfO<sub>2</sub> towards stabilization of the orthorhombic phase and to enhance the dielectric constant of the films.</div></div>","PeriodicalId":267,"journal":{"name":"Ceramics International","volume":"50 23","pages":"Pages 50271-50281"},"PeriodicalIF":5.1000,"publicationDate":"2024-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ceramics International","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0272884224044079","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 0
Abstract
Sm, Zr co-doped HfO2 films were deposited on a p-type silicon wafer using a cost-effective spin coating method. The influence of Sm, Zr co-doping concentration variation on structural, compositional, morphological, and electrical properties was examined. The dominance of the orthorhombic phase (o-phase) in comparison to the monoclinic phase was noted to rise with the simultaneous increment of Sm doping concentration and decrement of Zr concentration. A decrease in oxygen vacancies was noted for all the Sm, Zr co-doped HfO2 films from XPS results. Nonporous and uniform distribution of grains was observed from Field Emission Scanning Electron Microscope (FESEM) and Atomic Force Microscopy (AFM) studies. Electrical studies of MOS capacitors based on Sm, Zr co-doped HfO2 films revealed a low leakage current. C-V studies exhibited an increment of dielectric constant and a decrement of interface trap densities. Further, to obtain insights into the microscopic features of Sm, Zr co-doped films, impedance and modulus studies have been performed. The obtained results imply the potential of tuning Sm, Zr co-doping concentrations in HfO2 towards stabilization of the orthorhombic phase and to enhance the dielectric constant of the films.
期刊介绍:
Ceramics International covers the science of advanced ceramic materials. The journal encourages contributions that demonstrate how an understanding of the basic chemical and physical phenomena may direct materials design and stimulate ideas for new or improved processing techniques, in order to obtain materials with desired structural features and properties.
Ceramics International covers oxide and non-oxide ceramics, functional glasses, glass ceramics, amorphous inorganic non-metallic materials (and their combinations with metal and organic materials), in the form of particulates, dense or porous bodies, thin/thick films and laminated, graded and composite structures. Process related topics such as ceramic-ceramic joints or joining ceramics with dissimilar materials, as well as surface finishing and conditioning are also covered. Besides traditional processing techniques, manufacturing routes of interest include innovative procedures benefiting from externally applied stresses, electromagnetic fields and energetic beams, as well as top-down and self-assembly nanotechnology approaches. In addition, the journal welcomes submissions on bio-inspired and bio-enabled materials designs, experimentally validated multi scale modelling and simulation for materials design, and the use of the most advanced chemical and physical characterization techniques of structure, properties and behaviour.
Technologically relevant low-dimensional systems are a particular focus of Ceramics International. These include 0, 1 and 2-D nanomaterials (also covering CNTs, graphene and related materials, and diamond-like carbons), their nanocomposites, as well as nano-hybrids and hierarchical multifunctional nanostructures that might integrate molecular, biological and electronic components.