Switchable dual- and Single-Wavelength mode-locked bismuth-doped fiber lasers at O-band

IF 2.6 3区 计算机科学 Q2 ENGINEERING, ELECTRICAL & ELECTRONIC
H. Ahmad , B. Nizamani , M.Z. Samion , M.Z. Zulkifli
{"title":"Switchable dual- and Single-Wavelength mode-locked bismuth-doped fiber lasers at O-band","authors":"H. Ahmad ,&nbsp;B. Nizamani ,&nbsp;M.Z. Samion ,&nbsp;M.Z. Zulkifli","doi":"10.1016/j.yofte.2024.104009","DOIUrl":null,"url":null,"abstract":"<div><div>In this work, we have demonstrated the switchable and tunable operation of mode-locked pulses at O-band. A 40 m silica-based bismuth-doped fiber (BDF) was used to provide a high gain with low losses in the O-band regime. The carbon nanotube (CNT) was used as a mode-locker, whereas the dual- and single-wavelength mode-locked pulses were achieved by including a tunable Mach-Zehnder filter (TMZF) to the BDF laser cavity. The laser operation was switched between dual- and single-wavelength operation by tuning the TMZF wavelength knob within the ring cavity. The operating wavelengths were at 1308.2 and 1328.5 nm for dual-wavelength mode-locked pulses. At the same time, the single wavelength mode-locked laser was tuned at three different operating wavelengths of 1316.3, 1328.5, and 1321.4 nm, with the 3-dB bandwidths of 3.3, 3.1 and 4.6 nm, and pulse durations of 790, 810 and 570 fs, respectively. The mode-locked laser remained stable from pump powers of 607 to 715 mW.</div></div>","PeriodicalId":19663,"journal":{"name":"Optical Fiber Technology","volume":null,"pages":null},"PeriodicalIF":2.6000,"publicationDate":"2024-10-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Optical Fiber Technology","FirstCategoryId":"94","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1068520024003547","RegionNum":3,"RegionCategory":"计算机科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0

Abstract

In this work, we have demonstrated the switchable and tunable operation of mode-locked pulses at O-band. A 40 m silica-based bismuth-doped fiber (BDF) was used to provide a high gain with low losses in the O-band regime. The carbon nanotube (CNT) was used as a mode-locker, whereas the dual- and single-wavelength mode-locked pulses were achieved by including a tunable Mach-Zehnder filter (TMZF) to the BDF laser cavity. The laser operation was switched between dual- and single-wavelength operation by tuning the TMZF wavelength knob within the ring cavity. The operating wavelengths were at 1308.2 and 1328.5 nm for dual-wavelength mode-locked pulses. At the same time, the single wavelength mode-locked laser was tuned at three different operating wavelengths of 1316.3, 1328.5, and 1321.4 nm, with the 3-dB bandwidths of 3.3, 3.1 and 4.6 nm, and pulse durations of 790, 810 and 570 fs, respectively. The mode-locked laser remained stable from pump powers of 607 to 715 mW.
O 波段可切换双波长和单波长模式锁定掺铋光纤激光器
在这项工作中,我们展示了 O 波段锁模脉冲的可切换和可调谐操作。我们使用了一根 40 米长的硅基掺铋光纤(BDF),以在 O 波段提供高增益和低损耗。碳纳米管(CNT)被用作锁模器,而双波长和单波长锁模脉冲则是通过在 BDF 激光腔中加入可调谐马赫-泽恩德滤波器(TMZF)实现的。通过调节环形腔内的 TMZF 波长旋钮,激光器可在双波长和单波长之间切换。双波长锁模脉冲的工作波长分别为 1308.2 和 1328.5 nm。同时,单波长锁模激光器的工作波长分别为 1316.3、1328.5 和 1321.4 nm,3-dB 带宽分别为 3.3、3.1 和 4.6 nm,脉冲持续时间分别为 790、810 和 570 fs。锁模激光器在 607 至 715 mW 的泵浦功率范围内保持稳定。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Optical Fiber Technology
Optical Fiber Technology 工程技术-电信学
CiteScore
4.80
自引率
11.10%
发文量
327
审稿时长
63 days
期刊介绍: Innovations in optical fiber technology are revolutionizing world communications. Newly developed fiber amplifiers allow for direct transmission of high-speed signals over transcontinental distances without the need for electronic regeneration. Optical fibers find new applications in data processing. The impact of fiber materials, devices, and systems on communications in the coming decades will create an abundance of primary literature and the need for up-to-date reviews. Optical Fiber Technology: Materials, Devices, and Systems is a new cutting-edge journal designed to fill a need in this rapidly evolving field for speedy publication of regular length papers. Both theoretical and experimental papers on fiber materials, devices, and system performance evaluation and measurements are eligible, with emphasis on practical applications.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信